HK

the place for sore tacos
It is currently Thu Nov 21, 2019 9:33 pm

All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Fri May 31, 2013 10:38 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
If you directly linked to this thread, please visit our Fox Factory Service Information - Main Index for additional resources.

2009 Rear Shock Model Part Numbers

2005 - 2008 Rear Shock Model Part Numbers

2005 - 2008 Rear Shocks Small Parts Numbers

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Fri May 31, 2013 10:38 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
2009 Rear Shock Model Part Numbers

Click on the linked part numbers below to view drawings of most rear shock models.

Vanilla R
816-63-500 05-09 Vanilla R [6.5, 1.5, C .012 Ring 3X .004,2X .010]
816-63-540 05-09 Vanilla R [6.75, 1.75, C .012 Ring 3X .004,2X .010]
816-63-570 05-09 Vanilla R [7.25, 1.75, C .012 Ring 3X .004,2X .010]
816-63-590 05-09 Vanilla R [8.75, 2.50]
816-63-520 05-09 Vanilla R [7.875, 2.25]
816-63-510 05-09 Vanilla R [7.875, 2.00]
816-63-530 08 Vanilla R [7.50, 2.00]

FLOAT R
816-74-010 09 FLOAT R [6.00, 1.25, 2.7 CR, CM, RM]
816-74-020 09 FLOAT R [6.50, 1.50, 3.0 CR, CM, RM]
816-74-030 09 FLOAT R [7.50, 2.00, 3.6 CR, CM, RM]
816-74-040 09 FLOAT R [7.875, 2.00, 3.1 CR, CM, RM]
816-74-050 09 FLOAT R [7.875, 2.25, 4.0 CR, CM, RM]
816-74-060 09 FLOAT R XV [6.50, 1.50, 2.4 CR, CL, RL]
816-74-070 09 FLOAT R XV [7.50, 2.0, 2.8 CR, CL, RL]
816-74-080 09 FLOAT R XV [7.875, 2.0, 2.5 CR, CM, RM]
816-74-090 09 FLOAT R XV [7.875, 2.25, 3.0 CR, CM, RM]
816-74-100 09 FLOAT R XV [8.50, 2.50, 2.9 CR, CL, RL]
816-74-110 09 FLOAT R XV2 [7.875, 2.25, 2.5 CR, CL, RL]
816-74-120 09 FLOAT R [.6 in^3 Volume Spacer, 7.875, 2.00, CM, RM]
816-74-130 09 FLOAT R [7.25, 1.75, 2.9 CR, CM, RM]
816-74-140 09 FLOAT R XV [.6 in^3 Volume Spacer, 8.50, 2.50, 3.7 CR, CL, RL]
816-74-150 09 FLOAT R LAV [7.875, 2.00, 3.1 CR, CM, RM]
816-74-160 09 FLOAT R [.4 in^3 Volume Spacer, 7.875, 2.25, 5.4 CR, CM, RM]

Float RP2
816-77-450 09 FLOAT RP2 [5.50, 1.00, 2.3 CR, CF, RM]
816-77-460 09 FLOAT RP2 [6.00, 1.25, 2.7 CR, CF, RM]
816-77-470 09 FLOAT RP2 [6.50, 1.50, 3.0 CR, CF, RM]
816-77-473 09 FLOAT RP2 [6.50, 1.50, 3.0 CR, CF, RMM]
816-77-480 09 FLOAT RP2 [7.25, 1.75, 2.9 CR, CF, RM]
816-77-490 09 FLOAT RP2 [7.50, 2.00, 3.6 CR, CF, RM]
816-77-491 09 FLOAT RP2 [7.50, 2.00, 3.6 CR, CF, RL]
816-77-500 09 FLOAT RP2 [7.875, 2.00, 3.1 CR, CF, RM]
816-77-510 09 FLOAT RP2 [7.875, 2.25, 4.0 CR, CM, RL]
816-77-520 09 FLOAT RP2 XV [7.50, 2.00, 2.8 CR, CF, RL]
816-77-530 09 FLOAT RP2 XV [7.875, 2.25, 3.0 CR, CF, RM]
816-77-540 09 FLOAT RP2 XV [8.50, 2.50, 2.9 CR, CF, RM]
816-77-550 09 FLOAT RP2 XV [7.875, 2.00, 2.7 CR, CF, RM]
816-77-560 09 FLOAT RP2 XV [.6 in^3 Volume Spacer, 7.875, 2.00, CF, RM]
816-77-570 09 FLOAT RP2 Frank Roscoe [7.75, 2.25]
816-77-580 09 FLOAT RP2 Frank Remedy [7.75, 2.25]
816-77-590 09 FLOAT RP2 XV [.6 in^3 Volume Spacer, 8.50, 2.50, 3.7 CR, CM, RL]
816-77-600 09 FLOAT RP2 LAV [7.875, 2.00, 3.1 CR, CM, RM]
816-77-610 09 FLOAT RP2 [.6 in^3 Volume Spacer, 7.875, 2.00, 3.1 CR, CF, RM]

Float RP23
816-78-250 09 FLOAT RP23 [5.50, 1.00, 2.3 CR, CF, RM]
816-78-260 09 FLOAT RP23 [6.00, 1.25, 2.7 CR, CF, RM]
816-78-270 09 FLOAT RP23 [6.50, 1.50, 3.0 CR, CF, RM]
816-78-280 09 FLOAT RP23 [7.25, 1.75, 2.9 CR, CF, RM]
816-78-290 09 FLOAT RP23 [7.50, 2.00, 3.6 CR, CF, RM]
816-78-300 09 FLOAT RP23 [7.875, 2.00, 3.1 CR, CF, RM]
816-78-310 09 FLOAT RP23 [7.875, 2.25, 4.0 CR, CL, RL]
816-78-320 09 FLOAT RP23 XV [6.50, 1.50, 2.4 CR, CF, RM]
816-78-330 09 FLOAT RP23 XV [7.50, 2.00, 2.8 CR, CF, RL]
816-78-340 09 FLOAT RP23 XV [7.875, 2.00, 2.5 CR, CF, RM]
816-78-350 09 FLOAT RP23 XV [7.875, 2.25, 3.0 CR, CF, RM]
816-78-360 09 FLOAT RP23 XV2 [7.875, 2.25, 2.5 CR, CF, RM]
816-78-370 09 FLOAT RP23 XV [8.50, 2.50, 2.9 CR, CF, RM]
816-78-380 09 FLOAT RP23 [7.50, 1.75, CF, RM] w/ Vol. & Trav. Spacer
816-78-390 09 FLOAT RP23 [7.875, 2.00, CF, RM] w/ Vol. & Trav. Spacer
816-78-400 09 FLOAT RP23 XV [8.50, 2.50, CL, RL] w/ Vol. & Trav. Spacer
816-78-410 09 FLOAT RP23 UDL [6.50, 1.50, 3.0 CR, CF, RL]
816-78-420 09 FLOAT RP23 UDL [7.50, 2.00, 3.6 CR, CF, RL]
816-78-430 09 FLOAT RP23 UDL [7.875, 2.25, 4.0 CR, CM, RL]
816-78-440 09 FLOAT RP23 Frank Roscoe [7.75, 2.25]
816-78-450 09 FLOAT RP23 Frank Remedy [7.75, 2.25]
816-78-460 09 FLOAT RP23 LAV [7.875, 2.00, 3.1 CR, CM, RM]
816-78-470 09 FLOAT RP23 [7.50 , 1.50, 3.1 CR, SX Valving]

Float RPL
816-72-945 09 FLOAT RPL [1.50 Bore, 7.875, 2.000]
816-72-946 09 FLOAT RPL [1.50 Bore, 5.50, 1.00]
816-72-947 09 FLOAT RPL [1.50 Bore, 6.00, 1.25]
816-72-948 09 FLOAT RPL [1.50 Bore, 6.50, 1.50]
816-72-949 09 FLOAT RPL XV [1.50 Bore, 7.50, 2.00, 2.8 CR]
816-72-951 09 FLOAT RPL [1.500 Bore, 7.500, 1.750] w/ Vol. & Trav. Spacer
816-72-952 09 FLOAT RPL [1.50 Bore, 7.875, 2.000, CL]

VAN R
816-62-310 09 VAN R [1.070 Bore, 7.50, 2.00]
816-62-320 09 VAN R [1.070 Bore, 7.875, 2.00]
816-62-330 09 VAN R [1.070 Bore, 7.875, 2.25]
816-62-340 09 VAN R [1.070 Bore, 8.50, 2.50]
816-62-350 09 VAN R [1.070 Bore, 8.75, 2.50]
816-62-360 09 VAN R [1.070 Bore, 8.75, 2.75]
816-62-370 09 VAN R [1.070 Bore, 9.00, 2.50]
816-62-380 09 VAN R [1.070 Bore, 9.00, 2.75]
816-62-390 09 VAN R [1.070 Bore, 9.50, 3.00]

DHX 3.0
816-64-860 09 DHX 3.0 [1.070 Bore, 7.50, 2.00]
816-64-870 09 DHX 3.0 [1.070 Bore, 7.875, 2.00]
816-64-880 09 DHX 3.0 [1.070 Bore, 7.875, 2.25]
816-64-890 09 DHX 3.0 [1.070 Bore, 8.50, 2.50]
816-64-900 09 DHX 3.0 [1.070 Bore, 8.75, 2.75]
816-64-920 09 DHX 3.0 [1.070 Bore, 9.00, 2.75]
816-64-930 09 DHX 3.0 [1.070 Bore, 9.50, 3.00]

DHX 4.0
816-65-270 09 DHX 4.0 [1.070 Bore, 7.50, 2.00]
816-65-280 09 DHX 4.0 [1.070 Bore, 7.875, 2.00]
816-65-290 09 DHX 4.0 [1.070 Bore, 7.875, 2.25]
816-65-300 09 DHX 4.0 [1.070 Bore, 8.50, 2.50]
816-65-310 09 DHX 4.0 [1.070 Bore, 8.75, 2.75]
816-65-320 09 DHX 4.0 [1.070 Bore, 9.50, 3.00]
816-65-330 09 DHX 4.0 [1.070 Bore, 8.75, 2.75, 15.25mm Eye] SBC Demo
816-65-340 09 DHX 4.0 [1.070 Bore, 8.50, 2.50, 15.25mm Eye] SBC Demo

DHX 5.0
816-66-370 09 DHX 5.0 [1.070 Bore, 7.50, 2.00]
816-66-380 09 DHX 5.0 [1.070 Bore, 7.875, 2.00]
816-66-390 09 DHX 5.0 [1.070 Bore, 7.875, 2.25]
816-66-400 09 DHX 5.0 [1.070 Bore, 8.50, 2.50]
816-66-410 09 DHX 5.0 [1.070 Bore, 8.75, 2.75]
816-66-411 09 DHX 5.0 [1.070 Bore, 8.75, 2.75, Plan 8 Valving]
816-66-420 09 DHX 5.0 [1.070 Bore, 9.50, 3.00]
816-66-440 09 DHX 5.0 [1.070 Bore, 8.75, 2.75, 15.25mm Eye] SBC Demo
816-66-450 09 DHX 5.0 [1.070 Bore, 8.50, 2.50, 15.25mm Eye] SBC Demo

DHX Air 3.0
816-73-162 09 DHX Air 3.0 [7.875, 2.00, 3.4 CR]
816-73-172 09 DHX Air 3.0 [7.50, 2.00, 3.9 CR]
816-73-182 09 DHX Air 3.0 XV [7.50, 2.00, 2.9 CR]
816-73-192 09 DHX Air 3.0 [7.875, 2.25, 4.0 CR]
816-73-202 09 DHX Air 3.0 XV [7.875, 2.25, 3.2 CR]
816-73-212 09 DHX Air 3.0 XV [8.50, 2.50, 3.1 CR]
816-73-222 09 DHX Air 3.0 XV [8.75, 2.50, 3.1 CR]
816-73-232 09 DHX Air 3.0 XV [9.50, 3.00, 3.4 CR]
816-73-192 09 DHX Air 3.0 [7.875, 2.25, 4.0 CR]

DHX Air 4.0
816-73-161 09 DHX Air 4.0 QA [7.875, 2.00, 3.4 CR]
816-73-171 09 DHX Air 4.0 QA [7.50, 2.00, 3.9 CR]
816-73-181 09 DHX Air 4.0 QA XV [7.50, 2.00, 2.9 CR]
816-73-191 09 DHX Air 4.0 QA [7.875, 2.25, 4.0 CR]
816-73-201 09 DHX Air 4.0 QA XV [7.875, 2.25, 3.2 CR]
816-73-203 09 DHX Air 4.0 Knob XV [7.875, 2.25, 3.2 CR]
816-73-211 09 DHX Air 4.0 QA XV [8.50, 2.50, 3.1 CR]
816-73-221 09 DHX Air 4.0 QA XV [8.75, 2.50, 3.1 CR]
816-73-231 09 DHX Air 4.0 QA XV [7.875, 2.00, 2.7 CR]
816-73-241 09 DHX Air 4.0 QA XV [9.50, 3.00, 3.4 CR]
816-73-261 09 DHX Air 4.0 QA [.4 IN^3 Volume Spacer, 7.875, 2.25, 5.4 CR]

DHX Air 5.0
816-73-170 09 DHX Air 5.0 QA [7.50, 2.00, 3.9 CR]
816-73-180 09 DHX Air 5.0 QA XV [7.50, 2.00, 2.9 CR]
816-73-190 09 DHX Air 5.0 QA [7.875, 2.25, 4.0 CR]
816-73-200 09 DHX Air 5.0 QA XV [7.875, 2.25, 3.2 CR]
816-73-204 09 DHX Air 5.0 Knob XV [7.875, 2.25, 3.2 CR]
816-73-210 09 DHX Air 5.0 QA XV [8.50, 2.50, 3.1 CR]
816-73-213 09 DHX Air 5.0 QA XV [.6 IN^3 Volume Spacer, 8.50, 2.50, 3.7 CR]
816-73-220 09 DHX Air 5.0 QA XV [8.75, 2.50, 3.1 CR]
816-73-230 09 DHX Air 5.0 QA XV [9.50, 3.00, 3.4 CR]
816-73-233 09 DHX Air 5.0 QA XV [08 Eyelet, 9.50, 3.00, 3.4 CR]
816-73-240 09 DHX Air 5.0 QA XV [7.875, 2.00, 2.7 CR]
816-73-260 09 DHX Air 5.0 QA [.4 IN^3 Volume Spacer, 7.875, 2.25, 5.4 CR]
816-73-261 09 DHX Air 4.0 QA [.4 IN^3 Volume Spacer, 7.875, 2.25, 5.4 CR]
816-73-230 09 DHX Air 5.0 QA XV [9.50, 3.00, 3.4 CR]
816-73-190 09 DHX Air 5.0 QA [7.875, 2.25, 4.0 CR]

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Fri May 31, 2013 10:39 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
2005 - 2008 Rear Shock Model Part Numbers

Click on the linked part numbers below to view drawings of most rear shock models.

VAN R
816-62-220 07, 08 VAN R [1.070 Bore, 8.75, 2.75]
816-62-221 07, 08 VAN R [1.070 Bore, 8.75, 2.75] Light
816-62-230 07, 08 VAN R [1.070 Bore, 9.50, 3.00]
816-62-231 07, 08 VAN R [1.070 Bore, 9.50, 3.00] Light
816-62-240 07, 08 VAN R [1.070 Bore, 8.50, 2.50]
816-62-250 07, 08 VAN R [1.070 Bore, 7.875, 2.25]
816-62-260 07, 08 VAN R [1.070 Bore, 7.875, 2.00]
816-62-270 07, 08 VAN R [1.070 Bore, 7.50, 2.00]
816-62-280 07, 08 VAN R [1.070 Bore, 9.00, 2.50]
816-62-290 07, 08 VAN R [1.070 Bore, 8.75, 2.50]
816-62-300 07, 08 VAN R [1.070 Bore, 9.00, 2.75]

VANILLA R
816-63-500-D 05, 06, 07 Vanilla R [.940 Bore, 6.5, 1.5, C .012 Ring 3X .004, R 2X .010]
816-63-510-D 05, 06, 07 Vanilla R [.940 Bore, 7.875, 2.0, C .012 Ring 3X .004, R 2X .010]
816-63-520-D 05, 06, 07 Vanilla R [.940 Bore, 7.875, 2.25, C .012 Ring 3X .004, R 2X .010]
816-63-530-D 05, 06, 07 Vanilla R [.940 Bore, 7.5, 2.0, C .012 Ring 3X .004, R 2X .010]
816-63-590-A 05, 06, 07 Vanilla R [.940 Bore, 8.75, 2.50, C .012 Ring 3X .004, R 2X .010
816-63-600 Assembly: MY 06, 07, Vanilla R w/ Clevis [.940 Bore, 11.61, 2.00, C .012 Ring 3X .004, R 2X .010] Giant, Pistol
816-63-700 08 Vanilla R [8.75, 2.50]
816-63-710 08 Vanilla R [7.875, 2.25]
816-63-720 08 Vanilla R [7.875, 2.00]
816-63-730 08 Vanilla R [7.50, 2.00]

DHX 3.0
816-64-700 06, 07 DHX 3.0, STD PP/STD B/O [1.070 Bore, 8.75, 2.75]
816-64-710 06, 07 DHX 3.0, STD PP/STD B/O [1.070 Bore, 9.50, 3.00]
816-64-720 06, 07 DHX 3.0, STD PP/STD B/O [1.070 Bore, 8.50, 2.50]
816-64-730 06, 07 DHX 3.0, STD PP/STD B/O [1.070 Bore, 7.875, 2.25]
816-64-770 06, 07 DHX 3.0, STD PP/STD B/O [1.070 Bore, 8.75, 2.50]
816-64-800 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 7.50, 2.00]
816-64-810 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 7.875, 2.00]
816-64-820 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 7.875, 2.25]
816-64-830 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 8.50, 2.50]
816-64-840 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 8.75, 2.75]
816-64-850 08 DHX 3.0, STD PP/STD B/O [1.070 Bore, 9.50, 3.00]

DHX 4.0
816-65-100 06, 07 DHX 4.0, STD B/O [1.070 Bore, 8.75, 2.75]
816-65-110 06, 07 DHX 4.0, STD B/O [1.070 Bore, 9.50, 3.00]
816-65-120 06, 07 DHX 4.0, STD B/O [1.070 Bore, 8.50, 2.50]
816-65-122 07 DHX 4.0, STD B/O [1.070 Bore, 8.50, 2.50, 15.25mm eye] SBC Demo
816-65-130 06, 07 DHX 4.0, STD B/O [1.070 Bore, 7.875, 2.25]
816-65-140 06, 07 DHX 4.0, STD B/O [1.070 Bore, 7.875, 2.00]
816-65-171 06, 07 DHX 4.0, STD B/O [1.070 Bore, 9.00, 2.75] w/ Pellet, Enduro
816-65-200 08 DHX 4.0, STD B/O [1.070 Bore, 7.50, 2.00]
816-65-210 08 DHX 4.0, STD B/O [1.070 Bore, 7.875, 2.00]
816-65-220 08 DHX 4.0, STD B/O [1.070 Bore, 7.875, 2.25]
816-65-230 08 DHX 4.0, STD B/O [1.070 Bore, 8.50, 2.50]
816-65-240 08 DHX 4.0, STD B/O [1.070 Bore, 8.75, 2.75]
816-65-250 08 DHX 4.0, STD B/O [1.070 Bore, 9.00, 3.00]

DHX 5.0
816-66-200 06, 07 DHX 5.0, [1.070 Bore, 8.75, 2.75]
816-66-202 06, 07 DHX 5.0, [1.070 Bore, 8.75, 2.75, 15.25mm Eye] SBC Demo
816-66-210 06, 07 DHX 5.0, [1.070 Bore, 9.50, 3.00]
816-66-220 06, 07 DHX 5.0, [1.070 Bore, 8.50, 2.50]
816-66-221 06, 07 DHX 5.0, [1.070 Bore, 8.50, 2.50, 15.25 Eye] SBC Demo
816-66-230 06, 07 DHX 5.0, [1.070 Bore, 7.875, 2.25]
816-66-240 06, 07 DHX 5.0, [1.070 Bore, 7.875, 2.00]
816-66-250 06, 07 DHX 5.0, [1.070 Bore, 7.50, 2.00]
816-66-260 06, 07 DHX 5.0, [1.070 Bore, 9.00, 2.50]
816-66-270 06, 07 DHX 5.0, Remote Reservoir [1.070 Bore, 9.50, 3.00]
816-66-280 06, 07 DHX 5.0, [1.070 Bore, 9.00, 2.75] w/ Pellet, SX Trail
816-66-290 06, 07 DHX 5.0 [1.070 Bore, 8.75, 2.50]
816-66-301 08 DHX 5.0, [1.070 Bore, 9.00, 2.75, 15.25mm Eye] w/ Pellet, SBC SX Trail
816-66-302 08 DHX 5.0, [1.070 Bore, 8.50, 2.50, 15.25mm Eye] SBC Demo
816-66-303 08 DHX 5.0, [1.070 Bore, 8.75, 2.75, 15.25mm Eye] SBC Demo
816-66-310 08 DHX 5.0, [1.070 Bore, 7.50, 2.00]
816-66-320 08 DHX 5.0, [1.070 Bore, 7.875, 2.00]
816-66-330 08 DHX 5.0, [1.070 Bore, 7.875, 2.25]
816-66-340 08 DHX 5.0, [1.070 Bore, 8.50, 2.50]
816-66-350 08 DHX 5.0, [1.070 Bore, 8.75, 2.75]
816-66-360 08 DHX 5.0, [1.070 Bore, 9.50, 3.00]

VANILLA
816-67-300-D 05, 06, 07 Vanilla [.940 Bore, 6.5, 1.5, C .012 Ring 2X .004, R .039]
816-67-310-D 05, 06, 07 Vanilla [.940 Bore, 7.875, 2.0, C .012 Ring 2X .004, R .043]
816-67-340-D 05, 06, 07 Vanilla [.940 Bore, 7.500, 2.0, C .012 Ring 2X .004, R .043]

FLOAT RP23
816-72-02X 07, FLOAT RP23 XV [8.500, 2.500, C PPP, R 3x .006]
816-72-030 07, FLOAT RP23 XV1 [7.875, 2.250, C PPP, R 3x .006]
816-72-04X 07, FLOAT RP23 Lite R LAV [6.500, 1.500, C PPP, R 2x .006]
816-72-041 07, FLOAT RP23 LAV [6.500, 1.500, C PPP, R 3x .006]
816-72-050 07, FLOAT RP23 GAV [6.500, 1.500, C PPP, R 3x .006]
816-72-060 07, FLOAT RP23 XV Lite R [7.500, 2.000, C PPP, R 2x .006]
816-72-061 07, FLOAT RP23 XV [7.500, 2.000, C PPP, R 3x .006]
816-72-07X 07, FLOAT RP23 LAV, Lite R [7.875, 2.000, C PPP, R 2x .006]
816-72-08X 07, FLOAT RP23 GAV [7.875, 2.000, C PPP, R 3x .006]
816-72-190 07, FLOAT RP23 XV LAV [7.500, 2.500, C PPP, R 3x .006]
816-72-31X 07, FLOAT RP23 XV, Lite R, LAV [6.500, 1.500, C PPP, R 2x .006]
816-72-32X 07, FLOAT RP23, Lite R, USDL [6.500, 1.500, C PPP, R 2x .006]
816-72-33X 07, FLOAT RP23, Lite R, USDL [7.875, 2.000, C PPP, R 2x .006]
816-72-82X 07, FLOAT RP23 [5.500, 1.000, C PPP, R 3x .006]
816-72-83X 07, FLOAT RP23 [6.000, 1.250, C PPP, R 3x .006]
816-72-84X 07, FLOAT RP23 [6.500, 1.500, C PPP, R 3x .006]
816-72-841 07, FLOAT RP23 Lite R [6.500, 1.500, C PPP, R 2x .006]
816-72-85X 07, FLOAT RP23 [7.250, 1.750, C PPP, R 3x .006]
816-72-86X 07, FLOAT RP23 [7.500, 2.000, C PPP, R 3x .006]
816-72-861 07, FLOAT RP23, Lite R [7.500, 2.000, C PPP, R 2x .006]
816-72-87X 07, FLOAT RP23 [7.875, 2.000, C PPP, R 3x .006]
816-72-871 07, FLOAT RP23, Lite R [7.875, 2.000, C PPP, R 2x .006]
816-72-880 07, FLOAT RP23 [8.500, 2.500, C PPP, R 3x .006]
816-72-890 07, FLOAT RP23 [9.500, 3.000, C PPP, R 3x .006]
816-72-90X 07, FLOAT RP23 XV [7.875, 2.250, C PPP, R 3x .006]
816-72-91X 07, FLOAT RP23 [7.500, 1.750, C PPP, R 3x .006] w/ Vol. & Trav. Spacer
816-72-939 08, FLOAT RP23 [7.50, 1.75, SX Valving]
816-72-943 08, FLOAT RP23 [7.50, 1.75, SX Valving]
816-72-944 08, FLOAT RP23 [7.50, 1.75, SX Valving]
816-72-95X 07, FLOAT RP23 XV [6.500, 1.500, C PPP, R 3x .006]
816-72-96X 07, FLOAT RP23 XV [7.875, 2.000, C PPP, R 3x .006]
816-72-961 07, FLOAT RP23 XV Lite R [7.875, 2.000, C PPP, R 2x .006]
816-72-980 07, FLOAT RP23 XV LAV [7.875, 2.000, C PPP, R 3x .006]
816-72-99X 07, FLOAT RP23 Enduro [7.500, 1.750, C PPP, R 3x .006]
816-78-000 08, FLOAT RP23 [5.50, 1.00, 2.3 CR]
816-78-010 08, FLOAT RP23 [6.00, 1.25, 2.7 CR, CF, RM]
816-78-011 08, FLOAT RP23 [6.00, 1.25, 2.7 CR, CM, RM]
816-78-020 08, FLOAT RP23 [6.50, 1.50, 3.0 CR, CF, RM]
816-78-021 08, FLOAT RP23 [6.50, 1.50, 3.0 CR, CF, RL]
816-78-030 08, FLOAT RP23, CF, RM [7.25, 1.75, 2.9 CR]
816-78-040 08, FLOAT RP23 [7.50, 2.00, 3.6 CR, CF, RM]
816-78-041 08, FLOAT RP23 [7.50, 2.00, 3.6 CR, CF, RL]
816-78-042 08, FLOAT RP23 [7.50, 2.00, 3.6 CR, CM, RL]
816-78-043 08, FLOAT RP23 [7.50, 2.00, 3.6 CR, CM, RM]
816-78-050 08, FLOAT RP23 [7.875, 2.00, 3.1 CR, CF, RM]
816-78-051 08, FLOAT RP23 [7.875, 2.00, 3.1 CR, CF, RL]
816-78-052 08, FLOAT RP23 [7.875, 2.00, 3.1 CR, CM, RL]
816-78-060 08, FLOAT RP23 XV [6.50, 1.50, 2.4 CR]
816-78-070 08, FLOAT RP23 XV [7.50, 2.00, 2.8 CR, CL, RL]
816-78-071 08, FLOAT RP23 XV [7.50, 2.00, 2.8 CR]
816-78-080 08, FLOAT RP23 XV [7.875, 2.00, 2.5 CR]
816-78-081 08, FLOAT RP23 XV Light R [7.875, 2.00, 2.5 CR]
816-78-090 08, FLOAT RP23 XV [7.875, 2.25, 3.0 CR, CF, RM]
816-78-100 08, FLOAT RP23 XV [7.875, 2.25, 2.5 CR]
816-78-110 08, FLOAT RP23 XV [8.50, 2.50, 2.9 CR]
816-78-111 08, FLOAT RP23 XV [8.50, 2.50, 2.9 CR, CF, RL]
816-78-120 08, FLOAT RP23 [7.50, 1.75] w/ Vol. & Trav. Spacer
816-78-130 08, FLOAT RP23 Enduro [7.50, 1.75]
816-78-20x 08, FLOAT RP23 XV [.6 in^3 Volume Spacer, 8.50, 2.50, 3.7 CR, CL, RL]

FLOAT TRIAD/RPL/RP3
816-72-930 07, FLOAT TRIAD [1.500 Bore, 7.750, 1.750]
816-72-931 07, FLOAT RPL [1.500 Bore, 5.500, 1.000]
816-72-932 07, FLOAT RPL [1.500 Bore, 7.500, 1.750]
816-72-933 07, FLOAT RPL [1.500 Bore, 7.500, 2.000]
816-72-934 08, FLOAT RPL [1.500 Bore, 5.500, 1.000]
816-72-940 07, FLOAT TRIAD [1.500 Bore, 7.000, 1.600]
816-72-970 07, FLOAT RP3 [7.500, 2.000, C PPP, R 3x .006]
816-72-090 08 FLOAT RP3 [7.500, 2.000, 3.6 CR]
816-72-935 08, FLOAT RPL [1.500 Bore, 7.500, 1.750] w/ Vol. & Trav. Spacer
816-72-936 08, FLOAT RPL [1.500 Bore, 7.500, 2.000]
816-72-937 08, FLOAT RPL [1.500 Bore, 7.250, 1.750]
816-72-941 08, FLOAT TRIAD [1.500 Bore, 7.750, 1.750]
816-72-942 08, FLOAT TRIAD [1.500 Bore, 7.000, 1.600]

DHX AIR 5.0
816-73-002 06, 07 DHX Air 5.0 XV [7.50, 2.00, 2.9 CR]
816-73-008 07 DHX Air 5.0 XV GAV [7.50, 2.00, 2.9 CR]
816-73-009 07 DHX Air 5.0 XV LAV [7.50, 2.00, 2.9 CR]
816-73-011 06, 07 DHX Air 5.0 [7.875, 2.00, 3.4 CR]
816-73-012 06, 07 DHX Air 5.0 XV [7.875, 2.00, 2.7 CR]
816-73-029 07 DHX Air 5.0 XV GAV [7.875, 2.25, 3.2 CR]
816-73-031 06, 07 DHX Air 5.0 XV [8.50, 2.50, 3.1 CR]
816-73-021 06, 07 DHX Air 5.0 XV [7.875, 2.25, 3.2 CR]
816-73-022 06, 07 DHX Air 5.0 XV [7.875, 2.25, 2.6 CR]
816-73-039 07 DHX Air 5.0 XV LAV [8.50, 2.50, 3.1 CR]
816-73-042 06, 07 DHX Air 5.0 XV [8.75, 2.50, 3.1 CR]
816-73-043 06 DHX Air 5.0 XV [8.75, 2.50, 2.7 CR] w/ Pellet, Enduro
816-73-061 06, 07 DHX Air 5.0 XV [9.50, 3.00, 3.0 CR]
816-73-062 06, 07 DHX Air 5.0 XV [9.50, 3.00, 3.4 CR]
816-73-070 07 DHX Air 5.0 XV LAV [7.875, 2.25, 3.2 CR]
816-73-080 08 DHX Air 5.0 QA [7.50, 2.00, 3.9 CR]
816-73-081 08 DHX Air 5.0 QA XV [7.50, 2.00, 2.9 CR]
816-73-090 08 DHX Air 5.0 QA [7.875, 2.00, 3.4 CR]
816-73-091 08 DHX Air 5.0 QA XV [7.875, 2.00, 2.7 CR]
816-73-100 08 DHX Air 5.0 QA XV [7.875, 2.25, 3.2 CR]
816-73-101 08 DHX Air 5.0 QA XV [7.875, 2.25, 2.6 CR]
816-73-106 08 DHX Air 5.0 QA XV GAV [7.875, 2.25, 3.2 CR]
816-73-107 08 DHX Air 5.0 QA XV [7.875, 2.25, 3.2 CR]
816-73-108 08 DHX Air 5.0 QA [7.875, 2.25, 4.0 CR]
816-73-110 08 DHX Air 5.0 XV [8.50, 2.50, 3.1 CR]
816-73-113 08 DHX Air 5.0 QA XV [8.50, 2.50, 3.1 CR]
816-73-120 08 DHX Air 5.0 XV [8.75, 2.50, 3.1 CR]
816-73-123 08 DHX Air 5.0 QA XV [8.75, 2.50, 3.1 CR]
816-73-130 08 DHX Air 5.0 XV [9.00, 2.75, 3.3 CR]
816-73-133 08 DHX Air 5.0 QA XV [9.00, 2.75, 3.3 CR]
816-73-140 08 DHX Air 5.0 XV [9.50, 3.00, 3.4 CR]
816-73-143 08 DHX Air 5.0 QA XV [9.50, 3.00, 3.4 CR]

DHX AIR 4.0
816-73-007 07 DHX Air 4.0 XV GAV [7.50, 2.00, 2.9 CR]
816-73-013 07 DHX Air 4.0 [7.875, 2.00, 3.4 CR]
816-73-023 07 DHX Air 4.0 XV [7.875, 2.25, 3.2 CR]
816-73-027 07 DHX Air 4.0 XV LAV [7.875, 2.25, 3.2 CR]
816-73-035 07 DHX Air 4.0 XV [8.50, 2.50, 3.1 CR]
816-73-054 07 DHX Air 4.0 XV [9.00, 2.75, 3.3 CR]
816-73-063 07 DHX Air 4.0 XV [9.50, 3.00, 3.0 CR]
816-73-082 08 DHX Air 4.0 QA XV GAV [7.50, 2.00, 2.9 CR]
816-73-083 08 DHX Air 4.0 QA [7.50, 2.00, 3.9 CR]
816-73-092 08 DHX Air 4.0 QA [7.875, 2.00, 3.4 CR]
816-73-102 08 DHX Air 4.0 QA XV [7.875, 2.25, 3.2 CR]
816-73-104 08 DHX Air 4.0 QA XV LAV [7.875, 2.25, 3.2 CR]
816-73-109 08 DHX Air 4.0 QA [7.875, 2.25, 4.0 CR]
816-73-111 08 DHX Air 4.0 XV [8.50, 2.50, 3.1 CR]
816-73-114 08 DHX Air 4.0 QA XV [8.50, 2.50, 3.1 CR]
816-73-121 08 DHX Air 4.0 XV [8.75, 2.50, 3.1 CR]
816-73-124 08 DHX Air 4.0 QA XV [8.75, 2.50, 3.1 CR]
816-73-131 08 DHX Air 4.0 XV [9.00, 2.75, 3.3 CR]
816-73-134 08 DHX Air 4.0 QA XV [9.00, 2.75, 3.3 CR]
816-73-141 08 DHX Air 4.0 XV [9.50, 3.00, 3.4 CR]
816-73-144 08 DHX Air 4.0 QA XV [9.50, 3.00, 3.4 CR]

DHX AIR 3.0
816-73-105 08 DHX Air 3.0 XV GAV [7.875, 2.25, 3.2 CR]
816-73-015 07 DHX Air 3.0 [7.875, 2.00, 3.4 CR]
816-73-025 07 DHX Air 3.0 XV [7.875, 2.25, 3.2 CR]
816-73-028 07 DHX Air 3.0 XV GAV [7.875, 2.25, 3.2 CR]
816-73-037 07 DHX Air 3.0 XV [8.50, 2.50, 3.1 CR]
816-73-048 07 DHX Air 3.0 XV [8.75, 2.50, 3.1 CR]
816-73-056 07 DHX Air 3.0 XV [9.00, 2.75, 3.3 CR]
816-73-065 07 DHX Air 3.0 XV [9.50, 3.00, 3.0 CR]
816-73-084 08 DHX Air 3.0 [7.50, 2.00, 3.9 CR]
816-73-085 08 DHX Air 3.0 XV [7.50, 2.00, 2.9 CR]
816-73-093 08 DHX Air 3.0 [7.875, 2.00, 3.4 CR]
816-73-103 08 DHX Air 3.0 XV [7.875, 2.25, 3.2 CR]
816-73-105 08 DHX Air 3.0 XV GAV [7.875, 2.25, 3.2 CR]
816-73-112 08 DHX Air 3.0 XV [8.50, 2.50, 3.1 CR]
816-73-116 08 DHX Air 3.0 XV LAV [8.50, 2.50, 3.1 CR]
816-73-122 08 DHX Air 3.0 XV [8.75, 2.50, 3.1 CR]
816-73-132 08 DHX Air 3.0 XV [9.00, 2.75, 3.3 CR]
816-73-142 08 DHX Air 3.0 XV [9.50, 3.00, 3.4 CR]
816-73-150 08 DHX Air 3.0 [7.875, 2.25, 4.0 CR]

FLOAT
816-75-31X 05, 06, 07, FLOAT [1.500 Bore, 7.875, 2.0, C .012 Ring 3X .004, R .028]
816-75-32X 05, 06, 07, FLOAT [1.500 Bore, 7.5, 2.0, C .012 Ring 3X .004, R .039]
816-75-37X 05, 06, 07, FLOAT [1.500 Bore, 6.0, 1.25, C .012 Ring 3X .004, R .036]
816-75-38X 05, 06, 07, FLOAT [1.500 Bore, 7.5, 1.75, C .012 Ring 3X .004, R .055] w/ Vol. & Trav. Spacer
816-75-40x 08 FLOAT [PP, 5.5, 1.0, R .028, 2.3 CR]
816-75-41x 08 FLOAT [PP, 6.0, 1.25, R .028, 2.7 CR]
816-75-41x 08 FLOAT [PP, 6.0, 1.25, R .036, 2.7 CR]
816-75-42x 08 FLOAT [PP, 6.5, 1.5, R .028, 3.0 CR]
816-75-43x 08 FLOAT [PP, 7.25, 1.75, R .028, 2.9 CR]
816-75-44x 08 FLOAT [PP, 7.5, 2.0, R .028, 3.6 CR]
816-75-44x 08 FLOAT [PP, 7.5, 2.0, R .039, 3.6 CR]
816-75-44x 08 FLOAT [PP, 7.5, 2.0, R .047, 3.6 CR]
816-75-44x 08 FLOAT [PP, 7.5, 2.0, R .060, 3.6 CR]
816-75-45x 08 FLOAT [PP, 7.875, 2.0, R .028, 3.1 CR]
816-75-45x 08 FLOAT [PP, 7.875, 2.0, R .047, 3.1 CR]
816-75-46x 08 FLOAT [PP, 7.5, 1.75, R .028]
816-75-46x 08 FLOAT [PP, 7.5, 1.75, R .055]
816-75-46x 08 FLOAT [PP, 7.5, 1.75, R .047]

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Fri May 31, 2013 10:39 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
2005 - 2008 Rear Shock Model Part Numbers (continued...)

FLOAT R
816-76-190 07 FLOAT R [7.875, 2.0, C Full 0.004, R 4 X .006]
816-76-65X 06, 07, FLOAT R [1.500 Bore, 5.500, 1.000]
816-76-66X 06, 07, FLOAT R [1.500 Bore, 6.000, 1.250]
816-76-67X 06, 07, FLOAT R [1.500 Bore, 6.500, 1.500]
816-76-68X 06, 07, FLOAT R [1.500 Bore, 7.250, 1.750]
816-76-69X 06, 07, FLOAT R [1.500 Bore, 7.500, 2.000]
816-76-70X 06, 07, FLOAT R, Light [1.500 Bore, 7.875, 2.000]
816-76-72X 06, 07, FLOAT R AVA [1.500 Bore, 9.500, 3.000]
816-76-77X 06, 07, FLOAT R, Firm [1.500 Bore, 7.500, 1.750] w/ Vol. & Trav. Spacer
816-76-78X 06, 07, FLOAT R XV2, Light [1.500 Bore, 7.875, 2.250]
816-76-79X 06, 07, FLOAT R XV2, Light [1.500 Bore, 8.500, 2.500]
816-76-80X 06, 07, FLOAT R XV1, LAV [1.500 Bore, 7.875, 2.000]
816-76-81X 06, 07, FLOAT R XV1 [1.500 Bore, 7.875, 2.000]
816-76-82X 06, 07, FLOAT R [.6 in^3 Volume Spacer, 1.500 Bore, 7.875, 2.000]
816-76-850 07 FLOAT RD Adj., IV Adj., Remote [+ 1.500 Bore, 7.750, 1.750]
816-76-860 08 FLOAT R XV2 [1.500 Bore, 7.875, 2.250, 2.5 CR, CL, RL]
816-76-870 07, IV Adj, RD Adj [+ 1.500 Bore, 7.822, 1.875, C PP, R 5 X 0.004, BO 4 X 0.006 ]
816-76-88X 06, 07, FLOAT R XV, Light [1.500 Bore, 6.500, 1.500]
816-76-89X 06, 07, FLOAT R XV, Light [1.500 Bore, 7.500, 2.000]
816-76-90X 06, 07, FLOAT R, LAV, Light [1.500 Bore, 7.875, 2.000]
816-76-060 08 FLOAT R XV [7.875, 2.00, 2.5 CR]
816-76-061 08 FLOAT R XV, Light [7.875, 2.00, 2.5 CR]
816-76-070 08 FLOAT R XV [7.875, 2.25, 3.0 CR]
816-76-071 08 FLOAT R XV, Light [7.875, 2.25, 3.0 CR]
816-76-080 08 FLOAT R XV, Light [8.50, 2.50, 2.9 CR]
816-76-090 08 FLOAT R Firm [7.50, 1.75] w/ Vol. & Trav. Spacer
816-76-160 08 FLOAT R [.6 in^3 Volume Spacer, 7.875, 2.00]
816-76-170 08 FLOAT R, IV Adj, Remote [7.75, 1.75]
816-76-180 08 FLOAT R, IV Adj [7.822, 1.875]
816-76-910 08 FLOAT R [5.50, 1.00, 2.3 CR]
816-76-911 08 FLOAT R, Firm [5.50, 1.00, 2.3 CR]
816-76-920 08 FLOAT R [6.00, 1.25, 2.7 CR, CM, RM]
816-76-921 08 FLOAT R [6.00, 1.25, 2.7 CR, CL, RM]
816-76-93X 08 FLOAT R [6.50, 1.50, 3.0 CR]
816-76-940 08 FLOAT R [7.25, 1.75, 2.9 CR]
816-76-950 08 FLOAT R [7.50, 2.00, 3.6 CR, CM, RM]
816-76-951 08 FLOAT R [7.50, 2.00, 3.6 CR, CF, RL]
816-76-953 08 FLOAT R [7.50, 2.00, 3.6 CR, CL, RM]
816-76-960 08 FLOAT R [7.875, 2.00, 3.1 CR, CM, RM]
816-76-961 08 FLOAT R [7.875, 2.00, 3.1 CR, CL, RL]
816-76-962 08 FLOAT R [7.875, 2.00, 3.1 CR, CM, RL]
816-76-97x 08 FLOAT R [7.875, 2.25, 4.0 CR, CM, RM]
816-76-980 08 FLOAT R XV, Light [6.50, 1.50, 2.4 CR]
816-76-99X 08 FLOAT R XV [7.50, 2.00, 2.8 CR, CF, RL]

FLOAT RP2
816-77-10X 07, FLOAT RP2 [5.500, 1.000, C PPP, R 3x .006]
816-77-11X 07, FLOAT RP2 [6.000, 1.250, C PPP, R 3x .006]
816-77-12X 07, FLOAT RP2 [6.500, 1.500, C PPP, R 3x .006]
816-77-13X 07, FLOAT RP2 [7.250, 1.750, C PPP, R 3x .006]
816-77-14X 07, FLOAT RP2 [7.500, 2.000, C PPP, R 3x .006];
07, FLOAT RP2 Light [7.500, 2.000, C PPP, R 2x .006]
816-77-15X 07, FLOAT RP2 [7.875, 2.000, C PPP, R 3x .006];
07, FLOAT RP2 Light R[7.875, 2.000, C PPP, R 2x .006]
816-77-160 07, FLOAT RP2 AVA [8.500, 2.500, C PPP, R 3x .006]
816-77-170 07, FLOAT RP2 AVA [9.500, 3.000, C PPP, R 3x .006]
816-77-18X 07, FLOAT RP2 XV [7.875, 2.250, C PPP, R 3x .006]
816-77-19X 07, FLOAT RP2 [7.500, 1.750, C PPP, R 3x .006] w/ Vol. & Trav. Spacer
816-77-200 07, FLOAT RP2 XV, LAV [7.875, 2.000, C PPP, R 3x .006]
816-77-210 07, FLOAT RP2, GAV [6.500, 1.500, C PPP, R 3x .006]
816-77-220 07, FLOAT RP2, GAV [7.500, 2.000, C PPP, R 3x .006]
816-77-23X 07, FLOAT RP2 XV Light R [8.500, 2.500, C PPP, R 2x .006]
816-77-240 07, FLOAT RP2 LAV [7.500, 2.000, C PPP, R 3x .006]
816-77-25X 07, FLOAT RP2 XV Light[7.500, 2.000, C PPP, R 2x .006]
816-77-26X 07, FLOAT RP2 XV, GAV [7.500, 2.000, C PPP, R 3x .006]
816-77-27X 07, FLOAT RP2 XV [6.500, 1.500, C PPP, R 3x .006]
816-77-29X 08, FLOAT RP2 [.6 in^3 Volume Spacer, 7.875, 2.00, CF, RM]
816-77-30x 08, FLOAT RP2 [5.50, 1.00, 2.3 CR]
816-77-31x 08, FLOAT RP2 [6.00, 1.25, 2.7 CR]
816-77-32x 08, FLOAT RP2 [6.50, 1.50, 3.0 CR, CF RM]
816-77-33x 08, FLOAT RP2 [7.25, 1.75, 2.9 CR]
816-77-34x 08, FLOAT RP2 [7.50, 2.00, 3.6 CR, CF, RM]
816-77-34x 08, FLOAT RP2 [7.50, 2.00, 3.6 CR, CF, RL]
816-77-35x 08, FLOAT RP2 [7.875, 2.00, 3.1 CR]
816-77-35x 08, FLOAT RP2 Light [7.875, 2.00, 3.1 CR]
816-77-36x 08, FLOAT RP2 XV [7.500, 2.00, 2.8 CR, CF, RL]
816-77-37x 08, FLOAT RP2 XV [7.875, 2.25, 3.0 CR]
816-77-38x 08, FLOAT RP2 XV [8.50, 2.50, 2.9 CR, CF, RM]
816-77-39x 08, FLOAT RP2 [7.50, 1.75] w/ Vol. & Trav. Spacer
816-77-43x 08, FLOAT RP2 XV [6.50, 1.50, 2.4 CR, CF, RL]
816-77-44x 08, FLOAT RP2 XV [8.00, 2.25, 2.5 CR, CM, RL]

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Fri May 31, 2013 10:40 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
2005 - 2008 Rear Shocks Small Parts Numbers

Click the linked items below to view part numbers for all stocked 2005 - 2008 rear shock small parts:


BEARINGS
002-02-009-A Bearing: External [0.136 W X 0.942 OD X 0.031 TH, ? 0.940 Bore] Turcon, Blue, Ring (damper piston glide ring .940 bore shocks)
002-02-012 Bearing: External [0.136 W X 1.072 OD X 0.031TH, ? 1.070 Bore] Turcon, Blue, Ring (damper piston glide ring 1.070 bore shocks)
003-01-000-A Bearing: Internal [0.500 ID X 0.250 TLG X ? 0.498 Shaft] DU EYELET ALPS
003-01-001-A Bearing: Internal [0.500 ID X 0.500 TLG X ? 0.498 Shaft] DU EYELET STANDARD

RUBBER BUMPERS
008-00-005 Bumper: T/O [? 0.498 Shaft, 0.135 TLG] Injection Molded Black Buna-N
008-01-016 Bumper: B/O [? 0.498 Shaft, 0.400 TLG] Nitrile 60A
008-03-009 Bumper: B/O [? 0.498 Shaft, 0.450 ID X 0.400 TLG] MCU, Black, Elliptical

AIR VALVES
010-00-004-A Air Valve Parts: Cap, Air Valve [.305-32], Nickel Plated
010-00-005-A Air Valve Parts: Core, "Eaton", Blue, low pressure
010-00-010-A Air Valve Parts: Pellet Retainer [5/16-24, .220 TLG] Set Screw
010-00-011-A Air Valve Parts: Pellet [? 0.275 X 0.125 TLG] nitrile durometer A 90
200-00-011 Air Valve Part: Banjo, Housing, 90 Deg.
200-00-012 Air Valve Part: Banjo, Fastener, Custom, .85 L

BALLS
010-01-000-A Air Valve Parts: Ball [? 0.1250] 52100 Grade 25 Steel, Chrome
010-01-002-A Air Valve Parts: Ball [? 0.0938] 52100 Grade 25 Steel, Chrome
010-01-003-A Air Valve Parts: Ball [? 0.1875] Delrin
010-01-009 Damping Adjust Part: Ball [ Dia 1.5MM] 52100 Grad 25 Steel Chrome Plated

FASTENERS
018-00-012-A Fastener, Standard: Nut [1/4-28 X 5/32 TLG] Grade 8, Zinc Plated
018-01-004-A Fastener, Standard: Screw [#8-32 X 0.250 TLG] 303 SS, Socket Set Half Dog Point
018-01-006-A Fastener, Standard: Screw [#8-32 X 0.093 TLG] Socket Set Cup Point, Nylok patch
018-01-007-A Fastener, Standard: Screw [#8-32 X 0.250 TLG] 303 SS, Socket Set Half Dog Point, Nylok Patch
018-01-015-A Fastener, Standard: Screw [#1-64 X 0.188 TLG] Socket Head Cap
018-01-017-A Fastener, Standard: Screw [#6-32 X 0.250 TLG] Steel Black Oxide, Flat Head Socket Cap
018-01-026 Fastener, Standard: Screw [#6-32 X 0.250 TLG] 303 SS, Flat Head Socket Cap
018-04-005-A Fastener, Standard: Bolt [1/4-28 X 0.750 TLG] Alloy, Socket Head Cap, grade 8
018-05-019-A Fastener, Standard: Washer, [.125 ID X .187 OD X .010 TH] Stainless Steel
018-05-021 Fastener, Standard: Washer [0.253 ID X 0.438 OD X 0.032 TH] SST
019-01-006-A Fastener, Standard (Metric): Screw [M3 x 4mm] SS Socket Set Cone Point (Patchlock)
019-01-007-A Fastener, Standard (Metric): Screw [M3 x 8mm] Socket Flathead
019-01-016 Fastener, Standard (Metric): Screw [M3 x 4mm] SS Socket Set Cup Point (Patchlock)
019-01-017 Fastener, Standard (Metric): Screw [M3 x .5mm x 3mm] SS Socket Set Cup Point, Nylock Patch
019-01-018 Fastener, Standard (Metric): Screw [M3 x .5mm x 6mm] SS Socket Set Dog Point, Nylock Patch
019-01-025 Fastener, Standard (Metric): Screw [M6 X 40mm] SHCS, Grade 8.8, Zinc
019-01-035 Screw, M3 x .5mm x 5mm, SS, Socket Set Dog Point, Nylock Patch

REMOTE HOSE & SEAL WASHERS
020-05-006 Fittings, Pipe and Hose: Stat-o-seal, 8mm Bolt [0.603 OD x 0.301 ID x 0.050 TH] Al 7075-T6
023-15-001 Hose: [-4, 8 mm Straight Banjo X 8 mm Straight Banjo, 7.20 TLG] Braided SS
023-15-004 Hose: [-4, 8 mm Straight Banjo X 8 mm Straight Banjo, 18.875 TLG] Braided SS

DECALS
024-02-117 Decal: 05, 06, 07, 08 Vanilla
024-02-118 Decal: 2005, 2006 FLOAT
024-02-119 Decal: 2005, 2006 FLOAT R
024-02-126 Decal: 05, 06, 07 Vanilla R
024-02-136 Decal: 2005, 2006, 2007, 2008 FLOAT R_RP3 AVA, Adjust Sleeve, Large [8.5, 9.5]
024-02-137 Decal: 2005, 2006, 2007, 2008 FLOAT RP3 AVA, Main, Small [8.5, 7.5, 7.875]
024-02-138 Decal: 2005, 2006, 2007, 2008 FLOAT RP3 AVA, Main, Large [9.5]
024-02-139 Decal: 2005, 2006, 2007, 2008 FLOAT R AVA, Main, Large [9.5]
024-02-153 Decal: 05, 06, 07 DHX 3.0, Eyelet Decal, Dome
024-02-154 Decal: 07, 08 VAN R Reservoir
024-02-159 Decal: 06, 07 FLOAT, Tuning Belt, Firm
024-02-160 Decal: 06, 07 FLOAT, Tuning Belt, Standard
024-02-161 Decal: 06, 07 FLOAT, Tuning Belt, Light
024-02-162 Decal: 2006 DHX 5.0, Reservoir w/ PSI Range
024-02-163 Decal: 2006 DHX 4.0, Reservoir w/ PSI Range
024-02-167 Decal: 2006 FLOAT TRIAD II, Large
024-02-168 Decal: 06, 07 Brain Fade Specialized, Epic
024-02-169 Decal: 06, 07 Brain Fade Specialized, Stump Jumper 120
024-02-170 Decal: 2006 FLOAT TRIAD II, Small
024-02-174 Decal: 07 DHX 5.0 w/ PSI Range
024-02-175 Decal: 07 DHX 4.0 w/ PSI Range
024-02-176 Decal: 07 DHX 3.0 w/ PSI Range
024-02-177 Decal: 07 DHX Air, Small XV
024-02-178 Decal: 07 DHX Air, Large XV
024-02-179 Decal: 07 DHX Air, Standard Sleeve
024-02-180 Decal: 07 DHX Air, Small Length, Large OD XV
024-02-181 Decal: 07, 08 FLOAT RP23 [6.5+]
024-02-182 Decal: 07, 08 FLOAT RP2 [6.5+]
024-02-183 Decal: 07, 08 FLOAT RP23 [5.5, 6.0]
024-02-184 Decal: 07, 08 FLOAT RP2 [5.5, 6.0]
024-02-185 Decal: 07, 08 FLOAT [5.5, 6.0]
024-02-186 Decal: 07, 08 FLOAT [6.5+]
024-02-187 Decal: 07, 08 FLOAT R [5.5, 6.0]
024-02-188 Decal: 07, 08 FLOAT R [6.5+]
024-02-189 Decal: 07, 08 FLOAT R XV
024-02-190 Decal: 07, 08 FLOAT RP2 XV
024-02-191 Decal: 07, 08 FLOAT RP23 XV
024-02-192 Decal: 07 FLOAT R Epic
024-02-193 Decal: 07 FLOAT R Brain Sleeve
024-02-195 Decal: 07, 08 FLOAT RPL [5.5, 6.0]
024-02-196 Decal: 07, 08 FLOAT RPL (Lock-Up) [6.5+]
024-02-197 Decal: 07, 08 FLOAT RPL (Lock-Down) [6.5+]
024-02-198 Decal: 07, 08 FLOAT RP3 [6.5+]
024-02-199 Decal: 07, 08 DHX 5.0, No PSI range
024-02-200 Decal: 07, 08 DHX 4.0, No PSI range
024-02-201 Decal: 08 Vanilla R
024-02-208 Decal: 08 DHX 5.0
024-02-209 Decal: 08 DHX 4.0
024-02-210 Decal: 08 DHX 3.0
024-02-213 Decal: 08 FLOAT TRIAD II, Large, Vertical

SEALS & 0-RINGS
029-00-010-A Seals:O-Ring [(-010) .070 C.S. X .239 ID] Standard N674-70, Dynamic
029-00-017-A Seals: O-Ring [(-017) .070 C.S. X .676 ID] Standard N674-70, Dynamic
029-00-030-A Seals:O-Ring [(-030) .070 C.S. X 1.614 ID] Standard N674-70, Dynamic
029-00-031-A Seals:O-Ring [(-031) .070 C.S. X 1.739 ID] Standard N674-70, Dynamic
029-00-106-A Seals: O-Ring [(-106) .103 C.S. X 0.174 ID] Standard, N674-70, Dynamic
029-00-107 Seals: O-Ring [(-106) .103 C.S. X 0.206 ID] Standard, N674-70, Dynamic
029-00-112-A Seals:O-Ring [(-112) .103 C.S. X .487 ID] Standard N674-70, Dynamic
029-00-118 Seals:O-Ring [(-118) .103 C.S. X 0.862 ID] Standard N674-70, Dynamic
029-00-206-A Seals:O-Ring [(-206) .139 C.S. X .484 ID] Standard N674-70, Dynamic
029-00-209-A Seals:O-Ring [(-209) .139 C.S. X 0.671 ID] Standard N674-70, Dynamic
029-00-211-A Seals:O-Ring [(-211) .139 C.S. X 0.796 ID] Standard N674-70, Dynamic
029-00-224 Seals:O-Ring [(-224) .139 C.S. X 1.734 ID] Standard N674-70, Dynamic
029-02-110-A Seals:O-Ring [(-110) .103 C.S. X .362 ID] Polyurethane, Parker 4300 / 92 A, Or Disogrin 9250 / 90 A
029-02-112-A Seals:O-Ring [(-112) .103 C.S. X .487 ID] Polyurethane, Parker 4300 / 92 A, or Disogrin 9250/90 A
029-02-114-A Seals:O-Ring [(-114) .103 C.S. X .612 ID] Polyurethane, Parker 4300 / 92 A, Or Disogrin 9250 / 90 A
029-03-006-A Seals:O-Ring [(-006) .070 C.S. X 0.114 ID] Standard, N-70, Static
029-03-010-A Seals:O-Ring [(-010) .070 C.S. X .239 ID] Standard, N-70, Static
029-03-011-A Seals:O-Ring [(-011) .070 C.S. X .301 ID] Standard, N-70, Static
029-03-013 Seals:O-Ring [(-013) .070 C.S. X 0.426 ID] Standard , N-70, Static
029-03-015-A Seals:O-Ring [(-015) .070 C.S. X 0.551 ID] Standard , N-70, Static
029-03-020-A Seals:O-Ring [(-020) .070 C.S. X .864 ID] Standard, N-70, Static
029-03-022-A Seals: O-Ring [(-022) .070 C.S. X 0.989 ID] Standard, N-70, Static
029-03-023-A Seals:O-Ring [(-023) .070 C.S. X 1.051 ID] Standard, N-70, Static
029-03-025-A Seals:O-Ring [(-025) .070 C.S. X 1.176 ID] Standard, N-70, Static
029-03-110-A Seals:O-Ring [(-110) .103 C.S. X .362 ID] Standard, N-70, Static
029-03-112-A Seals:O-Ring [(-112) .103 C.S. X .487 ID] Standard, N-70, Static
029-03-126-A Seals:O-Ring [(-126) .103 C.S. X 1.362 ID] Standard, N-70, Static
029-05-105-A Seals:O-Ring [ .050 C.S. X 0.154 ID] Special N674-70, Dynamic
029-08-000-A Seals:O-Ring [(M26 x 1) .139 C.S. X 1.024 ID] Metric, N-70, Static
029-08-004-A Seals: O-Ring [3.0MM ID x 1.0MM CS] Metric, N-70, Static
029-08-022 Seals: O-Ring [8.0MM ID x 1.0MM CS] Metric, N-70, Static
029-08-030 Seals: O-Ring [10.0MM ID x 1.5MM CS] Metric, N-70, Static
029-08-035 Seals: O-Ring [17MM ID x 1.5MM CS] Metric, N-70, Static
029-08-036 Seals: O-Ring [22MM ID x 1.5MM CS] Metric, N-70, Static
029-08-042 Seals: O-Ring [12.0MM ID x 1.5MM CS] Metric, N-70, Static
029-08-043 Seals: O-Ring [2.5mm ID x 1mm CS] Metric, N-70, Static
029-08-052 Seals: O-Ring [9.0mm x 1.5mm CS] Metric, Nitrile, 90 Durometer, Dynamic
029-08-081 Seals: O-Ring [7.5mm ID X 1.0mm CS] Metric, N-70, Static
031-00-002 Seals: Parbak [(8-224) .118 W X 1.772 ID] N0300-90, Back-Up Ring
035-00-014-A Seals: Q-Ring [(-014) .070 C.S. X 0.489 ID] (366Y or equivalent)
035-00-110-A Seals:Q-Ring [(-110) .103 C.S. X .362 ID] (366Y or equivalent)
035-00-215-A Seals:Q-Ring [(-215) .139 C.S. X 1.109 ID] (366V or equivalent)
035-00-218-A Seals:Q-Ring [(-218) .139 C.S. X 1.234 ID] 366Y
035-01-000 Seals: Special Q-Ring
035-01-218 Seals: Q-Ring [(-218) .139 C.S. X 1.234 ID] 523EU
035-05-215-A Seals:Q-Ring [(-215) .139 C.S. X 1.046 ID] (Polymod)
036-01-004-A Seals: U-cup, H [? 0.375 Shaft] 4181 Nitrile durometer 70
036-01-006-A Seals: U-cup, H [? 0.498 Shaft] 4300 Urethane, AY
036-01-017 Seals: Chevron, FLOAT Body [? 1.060 Shaft] A216 85A NBR
036-02-014-A Seals: Wiper [? 1.060 Shaft] 4611 Urethane
036-02-020 Seals: Wiper, Samuri [? 1.060 Shaft] A216 85 A NBR

RETAINING RINGS
038-00-020 Retaining Ring: Snap [-75] Steel, Black Oxide, External
038-00-023 Retaining Ring: Snap, [-93] SS: PH 15-7 MO, Basic Internal
038-01-009-A Retaining Ring: Wire [0.062 CS X 1.540 ID] 17-7 SS
038-01-012 Retaining Ring: Wire [.888 OD X .040 Wire] 17-7 SST
038-01-024 Retaining Ring: Wire [1.200 OD X 0.040 CS] 17-7 SST

SMALL SPRINGS
039-00-003-A Spring: [0.190 TLG X 0.120 OD X 25.6 lbs/in] Music Wire, right hand wound
039-00-005-A Spring: [0.125 TLG X 0.125 O.D. X 36.45 lbs/in] Music Wire, Zinc plated
039-00-034-A Spring: [ 1.500 TLG X 0.440 ID X .1183 lbs/in] Music Wire
039-00-042 Spring: Detent [.13 TLG X .088 OD X 22 lb/in] Stainless Steel, right hand wound
039-00-043-A Spring: [.170 TLG X .109 OD X .8 lbs/in] Music Wire, Closed Ends
039-00-044-A Spring: [.170 TLG X .128 ID X 2.0 lbs/in] Music Wire
039-00-046 Spring: PP Adjust [.440 TLG X .273 OD X 135 lb/in], Music Wire
039-00-054 Spring: RD Check [.440 TLG X .938 OD X 19 lb/in], Music Wire
039-00-068 Spring: Compression [0.376 TLG x 0.0723 ID x 65 lb/in]
039-00-070 Spring: Compression [0.376 TLG x 0.076 ID x 41 lb/in]
039-00-073 Spring: Belleville, 0.038 Travel [ 0.825 OD X 0.330 ID X 0.008 TH]
039-00-094 Spring: Compression [0.220 TLG x 0.157 ID x 8.6 lb/in]
039-02-001-A Spring: [3.050 TLG X 1.250 ID X 300 lbs/in, 1.750 Travel] Black
039-02-003-A Spring: [3.150 TLG X 1.250 ID X 500 lbs/in, 1.600 Travel] Black
039-02-006-A Spring: [3.300 TLG X 1.250 ID X 400 lbs/in, 1.780 Travel] Black
039-02-007-A Spring: [3.400 TLG X 1.250 ID X 600 lbs/in, 1.630 Travel] Black
039-02-010-A Spring: [3.400 TLG X 1.250 ID X 700 lbs/in, 1.570 Travel] Black
039-02-012-A Spring: [3.600 TLG X 1.250 ID X 350 lbs/in, 1.930 Travel] Black
039-02-022-A Spring: [4.250 TLG X 1.250 ID X 300 lbs/in, 2.350 Travel] Black
039-02-023-A Spring: [4.354 TLG X 1.250 ID X 350 lbs/in, 2.310 Travel] Black
039-02-027-A Spring: [4.700 TLG X 1.250 ID X 400 lbs/in, 2.370 Travel] Black
039-02-029-A Spring: [4.900 TLG X 1.250 ID X 450 lbs/in, 2.390 Travel] Black
039-02-030-A Spring: [4.900 TLG X 1.250 ID X 500 lbs/in, 2.300 Travel] Black
039-02-031-A Spring: [4.950 TLG X 1.250 ID X 550 lbs/in, 2.290 Travel] Black
039-02-036-A Spring: [5.150 TLG X 1.250 ID X 750 lbs/in, 2.200 Travel] Black
039-02-037-A Spring: [5.250 TLG X 1.250 ID X 650 lbs/in, 2.350 Travel] Black
039-02-053-A Spring: [5.350 TLG X 1.250 ID X 600 lbs/in, 2.250 Travel] Black
039-02-067-A Spring: [5.400 TLG X 1.250 ID X 700 lbs/in, 2.300 Travel] Black
039-02-070-A Spring: [5.750 TLG X 1.250 ID X 800 lbs/in, 2.300 Travel] Black
039-02-071 Spring: (128-1035F1) [4.72 TLG X 1.22 ID X 600 lbs/in, 2.300 Travel] Black
039-02-072 Spring: (1281-1033F7) [4.99 TLG X 1.22 ID X 650 lbs/in, 2.300 Travel] Black

DH, DHX AND VAN R REAR SHOCK SPRINGS
039-03-000 Spring: [6.126 TLG X 1.385 ID X 300 lbs/in, 3.240 Travel] Black
039-03-001 Spring: [5.799 TLG X 1.385 ID X 350 lbs/in, 2.800 Travel] Black
039-03-002 Spring: [5.459 TLG X 1.385 ID X 400 lbs/in, 2.800 Travel] Black
039-03-003 Spring: [5.409 TLG X 1.385 ID X 450 lbs/in, 2.800 Travel] Black
039-03-004 Spring: [5.728 TLG X 1.385 ID X 500 lbs/in, 2.800 Travel] Black
039-03-005 Spring: [5.949 TLG X 1.385 ID X 550 lbs/in, 2.800 Travel] Black
039-03-006 Spring: [6.126 TLG X 1.385 ID X 600 lbs/in, 2.550 Travel] Black
039-03-007 Spring: [6.382 TLG X 1.385 ID X 600 lbs/in, 2.800 Travel] Black
039-03-008 Spring: [6.150 TLG X 1.385 ID X 650 lbs/in, 2.800 Travel] Black
039-03-010 Spring: [6.402 TLG X 1.385 ID X 700 lbs/in, 2.800 Travel] Black
039-03-011 Spring: [4.285 TLG X 1.385 ID X 250 lbs/in, 2.500 Travel] Black
039-03-012 Spring: [4.344 TLG X 1.385 ID X 300 lbs/in, 2.500 Travel] Black
039-03-013 Spring: [4.381 TLG X 1.385 ID X 350 lbs/in, 2.450 Travel] Black
039-03-014 Spring: [4.675 TLG X 1.385 ID X 400 lbs/in, 2.450 Travel] Black
039-03-015 Spring: [4.723 TLG X 1.385 ID X 450 lbs/in, 2.370 Travel] Black
039-03-016 Spring: [4.733 TLG X 1.385 ID X 500 lbs/in, 2.350 Travel] Black
039-03-017 Spring: [4.776 TLG X 1.385 ID X 550 lbs/in, 2.350 Travel] Black
039-03-018 Spring: [4.830 TLG X 1.385 ID X 600 lbs/in, 2.350 Travel] Black
039-03-019 Spring: [4.954 TLG X 1.385 ID X 650 lbs/in, 2.300 Travel] Black
039-03-022 Spring: [4.924 TLG X 1.385 ID X 250 lbs/in, 2.800 Travel] Black
039-03-100 Spring: [5.200 TLG X 1.375 ID X 2.173 OD X 700 lb/in, 2.300 Travel] Black, Barrel
039-03-101 Spring: [5.280 TLG X 1.375 ID X 2.189 OD X 800 lb/in, 2.300 Travel] Black, Barrel
039-09-000 Spring: [6.476 TLG X 1.385 ID X 300 lbs/in, 3.25 Travel] Black
039-09-001 Spring: [6.689 TLG X 1.385 ID X 350 lbs/in, 3.25 Travel] Black
039-09-002 Spring: [6.634 TLG X 1.385 ID X 400 lbs/in, 3.25 Travel] Black
039-09-003 Spring: [6.760 TLG X 1.385 ID X 450 lbs/in, 3.25 Travel] Black
039-09-004 Spring: [6.300 TLG X 1.385 ID X 500 lbs/in, 3.25 Travel] Black
039-09-005 Spring: [6.700 TLG X 1.385 ID X 550 lbs/in, 3.25 Travel] Black
039-09-007 Spring: [6.640 TLG X 1.385 ID X 650 lbs/in, 3.19 Travel] Black

VALVE SHIMS
040-04-060-A Valve: [0.600 OD X 0.377 ID X 0.004 TH]
040-04-070-A Valve: [0.700 OD X 0.377 ID X 0.004 TH]
040-04-080-A Valve: [0.800 OD X 0.377 ID X 0.004 TH]
040-06-070-A Valve: [0.700 OD X 0.377 ID X 0.006 TH]
040-10-070-A Valve: [0.700 OD X 0.377 ID X 0.010 TH]
040-15-110-A Valve: [1.100 OD X 0.377 ID X 0.015 TH]
041-15-110-A Valve: [1.100 OD X 0.504 ID X 0.015 TH]
043-06-832 Valve: [0.832 OD X 0.550 ID X 0.006 TH]
043-10-002-A Valve: [0.850 OD X 0.076 ID X 0.020 TH]
043-10-105 Valve: [0.105 OD X 0.056 ID X 0.010 TH]
043-10-907-A Valve: [.907 OD X .728 ID X .010 TH]
043-10-941 Valve: Ring Shim [0.941 OD X 0.675 ID X 0.010 TH]
043-12-080-A Valve: Ring Shim [0.800 OD X 0.710 ID X 0.012 TH]
043-15-090 Valve: Ring Shim [0.900 OD X 0.810 ID X 0.015 TH]
043-20-140-A Valve: [1.400 OD X 0.628 ID X 0.020 TH]
044-04-050-A Valve: [0.500 OD X 0.252 ID X 0.0045 TH]
044-04-060-A Valve: [0.600 OD X 0.252 ID X 0.0045 TH]
044-04-070-A Valve: [0.700 OD X 0.252 ID X 0.0045 TH]
044-04-080-A Valve: [0.800 OD X 0.252 ID X 0.0045 TH]
044-04-085 Valve: [0.850 OD X 0.252 ID X 0.0045 TH]
044-04-090 Valve: [0.900 OD X 0.252 ID X 0.0045 TH]
044-06-050 Valve: [0.500 OD X 0.252 ID X 0.006 TH]
044-06-060-A Valve: [0.600 OD X 0.252 ID X 0.006 TH]
044-06-070-A Valve: [0.700 OD X 0.252 ID X 0.006 TH]
044-06-080-A Valve: [0.800 OD X 0.252 ID X 0.006 TH]
044-06-085-A Valve: [0.850 OD X 0.252 ID X 0.006 TH]
044-06-090 Valve: [0.900 OD X 0.252 ID X 0.006 TH]
044-10-040-A Valve: [0.400 OD X 0.252 ID X 0.010 TH]
044-10-060-A Valve: [0.600 OD X 0.252 ID X 0.010 TH]
044-10-070-A Valve: [0.700 OD X 0.252 ID X 0.010 TH]
044-10-090-A ^Valve: [0.900 OD X 0.252 ID X 0.010 TH]
050-01-011-A Plate: Back-Up [0.400 OD X 0.252 ID X 0.020 TH, ? 0.375 Shaft] Steel
050-01-012-A Plate: Back-Up [0.700 OD X 0.252 ID X 0.050 TH, ? 0.375 Shaft] Steel
050-01-013-A Plate: Back-Up [0.800 OD X 0.252 ID X 0.050 TH, ? 0.375 Shaft] Steel
050-01-014-A Plate: Back-Up [0.800 OD X 0.377 ID X 0.050 TH, ? 0.620 Shaft] Steel
050-01-015-A Plate: Back-Up [0.450 OD X 0.377 ID X 0.020 TH] Steel
050-01-016-A Plate: Back-Up [0.350 OD X 0.252 ID X 0.020 TH, ? 0.375 Shaft] Steel
050-01-017 Plate: Back-Up [.900 OD X .252 ID X .050 TH, ? .500 Shaft] Steel

BEARING HOUSING
203-03-013 Bearing Housing: w/ External Seal [? 0.940 Bore, ? 0.375 Shaft, 0.815 TLG] Al 2011
203-03-014 Bearing Housing: w/ External Seal [? 0.940 Bore, ? 0.375 Shaft, 1.065 TLG] Al 2011
203-03-020 Bearing Housing: w/ External Seal [.940 Bore, ? .620 Shaft, 1.065 TLG] Al 2011
203-03-024 Bearing Housing: [1.070 Bore, .498 Shaft, .975 TLG] Al 2011, Black Ano II
203-03-025 Bearing Housing: [.940 Bore, ? .375 Shaft, .700 TLG] Al 2011, w/ T/O Bumper, Black Ano II
203-03-026 Bearing Housing: [.940 Bore, ? .375 Shaft, .950 TLG] Al 2011, w/ T/O Bumper, Black Ano II
203-03-027 Bearing Housing: [.940 Bore, ? .500 Shaft, .815 TLG] Al 2011
203-03-028 Bearing Housing: [.940 Bore, ? .500 Shaft, 1.065 TLG] Al 2011

SHOCK BODIES
204-05-014-G Body: (T) [? 0.940 Bore, 3.580 TLG] Al 6061, Clear Ano III, Std Thread OD
204-12-002-D Body: (T) [? 0.940 Bore, 4.125 TLG] Al Impact Extrusion w/ Cap, Clear Ano III, Std Thread OD
204-12-004-D Body: (T) [? 0.940 Bore, 4.625 TLG] Al Impact Extrusion w/ Cap, Clear Ano III, Std Thread OD
204-12-007-D Body: (T) [? 0.940 Bore, 5.000 TLG] Al Impact Extrusion w/ Cap, Clear Ano III, Std Thread OD
204-12-008-D Body: (T) [? 0.940 Bore, 4.750 TLG] Al Impact Extrusion w/ Cap, Clear Ano III, Std Thread OD
204-12-009-D Body: (T) [? 0.940 Bore, 5.375 TLG] Al Impact Extrusion w/ Cap, Clear Ano III, Std Thread OD
204-54-005 Body: (T) [? 0.940 Bore, 1.060 OD, 3.687 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-006 Body: (T) [? 0.940 Bore, 1.060 OD, 4.312 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-007 Body: (T) [? 0.940 Bore, 1.060 OD, 3.187 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-008 Body: (T) [? 0.940 Bore, 1.060 OD, 3.437 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-009 Body: (T) [? 0.940 Bore, 1.060 OD, 3.937 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-011 Body: (T) [? 0.940 Bore, 1.060 OD, 4.187 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-012 Body: (T) [? 0.940 Bore, 1.060 OD, 4.935 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-013 Body: (T) [? 0.940 Bore, 1.060 OD, 4.687 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-54-014 Body: (T) [? 0.940 Bore, 1.060 OD, 5.187 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, Clear Ano III
204-61-000-A Body: [? 0.940 Bore, 1.060 OD, 3.402 TLG, 1.125-20 UN-2A, 22mm Hex] Impact Extrusion Al 6061, Clear Ano III
204-68-000 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 4.155 TLG] Al 6061, Clear Ano III, Std Thread OD
204-68-001 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 4.655 TLG] Al 6061, Clear Ano III, Std Thread OD
204-68-002 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 4.030 TLG] Al 6061, Clear Ano III, Std Thread OD
204-68-003 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 3.780 TLG] Al 6061, Clear Ano III, Std Thread OD
204-68-004 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 3.655 TLG] Al 6061, Clear Ano III, Std Thread OD
204-68-005 DHX Body: (T) [? 1.070 Bore X 1.250-24 OD X 4.405 TLG] Al 6061, Clear Ano III, Std Thread OD
204-71-000 Body: (T) [0.940 Bore, 1.060 OD, 15.25mm Eye, 4.187 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, DHX Air
204-71-003 Body: (T) [0.940 Bore, 1.060 OD, 15.25mm Eye, 4.935 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, DHX Air
204-71-005 Body: (T) [0.940 Bore, 1.060 OD, 15.25mm Eye, 3.937 TLG, 1.125-20 UN-2A] Impact Extrusion Al 6061, FLOAT R

SHOCK BODY CAPS
206-03-018 Body Cap: Piggyback, PS Adjust [1.070 Body Bore, 1.070 Res Bore, ? .500 Shaft, TLG] Al 6061, Black Ano III
206-03-019 Body Cap: Piggyback, Non Adjust [1.070 Bore, ? .500 Shaft] Al 6061, Black Ano III
206-03-020 Body Cap: Remote [1.070 Bore] Al 6061, Black Ano III
206-03-021 Body Cap: Clevis [0.940 Bore] GIant, Pistol, Al 6061, Black Ano III

DAMPING ADJUST PARTS
210-01-010-A Damping Adjust Part: Housing, CD Blow Off [1.070 Bore, 5/16-32 ID X .980 OD X .570 TLG] Al 6061
210-03-006 Damping Adjust Part: MY05 Float Rebound Knob, 6061-T6 AL, Type II Class 2 Red Ano
210-03-032-A Damping Adjust Part: Dial, RD Adjust, 10 Detents w/ Slots [ 0.700 OD X 0.125 Hex X 0.180 TLG] Al 6061, Red Ano III
210-03-040 Damping Adjust Part: Spring Perch, Adjustable [ .542 OD X .380 ID X .380 TLG] Al 6061
210-03-041 Damping Adjust Part: Ramp [ 1.094 OD X .788 ID X .529 TLG] Al 6061
210-03-044 Damping Adjust Part: Knob, RD Adjust [.925 TLG, .560 OD] w/ Hole, Al 7075, Red Ano III
210-03-045 Damping Adjust Part: Knob, ProPedal Adjust [0.900 OD X 0.125 ID X 0.250 TLG] Al 6061, Blue Ano II
210-03-050 MY05 Damping Adjuster Part: RD Adjust [0.375 Shaft]
210-03-054 Fastener Custom: Insert, PP Spring Adjust [.563OD x 5/16 Hex ID X .600 TLG] 303 SS
210-03-075 Knob: Bottom-Out Adjust [1.280 OD X 0.705 TLG X 5/8 Hex ID] Al 6061, Blue Ano II
210-03-077 Damping Adjust Part: Knob, Trail Tune Adjust, Blue
210-03-086 Damping Adjust Part: Compression Adjust Knob, 07 FLOAT RP23
210-03-087 Damping Adjust Part: MY07 RD Adjust Knob [0.375 Shaft]
210-10-014-A Damping Adjust Part: Piston Bolt [1.070 Bore, .435 SHLG X .555 TLG. 1/4-28] CD Adjust
210-10-015-A Damping Adjust Part: Piston Bolt [.940 Bore, .504 SHLG X .619 TLG X .250 ID] RD Adjust, Al 7075
210-10-021 Damping Adjust Part: Piston Bolt, CD Check [.940 Bore, 3/8 Hex X .080 ID X .535 SHLG] RD Adjust
210-10-026 Damping Adjust Part: Piston Bolt, CD Check [.940 Bore, 3/8 Hex X .080 ID X .570 SHLG] RD Adjust
210-10-039 Damping Adjust Part: Piston Bolt, IV Reservoir [0.435 SHLG X 0.078 ID]
210-10-041 Damping Adj. Part: TRIAD Piston Bolt [0.419 SHLG X .154 ID X 0.600TLG, 4 X .052 X-Hole] RD/CD Adj.
210-10-044 Damping Adjust Part: Piston Bolt, Tapered RD Adjust, DHX Air, Al 7075
210-10-045 Damping Adjust Part: Piston Bolt [0.600 SHLG X 0.100 ID X 0.725 TLG, 8 X 0.052 X-Hole] RD/CD Adj.
210-15-002 Damping Adjust Part: Lever, 05 RP3
210-15-003 Damping Adjust Part: Check Valve [0.115 OD, 0.636 TLG] 303SS
210-15-032 Damping Adjust Part: Check, Piston Bolt [.120 OD X .130 TLG] Delrin
210-15-054 Damping Adjust Part: Inertia Valve, Taper, Ring [.3750 ID X .800 OD X .880 TLG] Brass
210-15-037 Damping Adjust Part: Rod, PS Spring Adjust [.396 OD X .850 TLG] 303 SS
210-15-043 Compression Adjust: Trail Tune [0.750 OD X 0.090 ID X 0.655 TLG] 6061-T6, Black Ano, Type III
210-15-044 Damping Adjust Part: Lever, 07 FLOAT RP23
210-15-045 Damping Adjust Part: Compression Adjust Lever Boss
210-15-046 Damping Adjust Part: Lever, 2007 FLOAT RP2
210-15-047 Damping Adjust Part: Lever, 07 FLOAT RPL
210-15-048 Damp Adj Part: Upside Down Compression Adjust Lever Boss
210-15-051 Damping Adjust Part: Lever for MY05 FLOAT RP7
210-15-052 Damping Adjust Part: Check Valve [0.115 OD, 88deg. Tip]
210-15-054 Damping Adjust Part: Inertia Valve, Taper, Ring [.3750 ID X .800 OD X .880 TLG, 0.7205 Dia] Brass
815-00-034-A Damping Adjust Assembly: Piston Bolt, CD CHECK [1/4-28 X 3/8 Hex Head X .535 SHLG] Stainless
815-00-040 MY05 Damping Adjust Assembly: Piston Bolt, CD CHECK [1/4-28 X 3/8 Hex Head X .570 SHLG] Stainless

METERING RODS
210-19-012-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 2.705 TLG] Al 7075
210-19-014-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 3.205 TLG] Al 7075
210-19-015-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 3.455 TLG] Al 7075
210-19-016-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 3.705 TLG] Al 7075
210-19-017-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 3.955 TLG] Al 7075
210-19-018-A Damping Adjust Part: (T) Metering Rod [0.166 OD, 4.205 TLG] Al 7075
210-19-020-A Damping Adjust Part: (T) Metering Rod [.166 OD X 4.455 TLG] Al 7075
210-24-000-A Damping Adjust Part: (T) Adjuster Rod [0.166 OD, 0.125 Hex, 3.765 TLG] Al 7075, Clear Ano III
210-40-000 MY05 Damping Adjust Part: (T) Metering Rod, Outer Rebound Adjust, 2.030 TLG, Al 7075
210-40-003 MY05 Damping Adjust Part: (T) Metering Rod, Outer Rebound Adjust, 2.780 TLG, Al 7075
210-40-004 MY05 Damping Adjust Part: (T) Metering Rod, Outer Rebound Adjust, 3.030 TLG, Al 7075
210-40-005 MY05 Damping Adjust Part: (T) Metering Rod, Outer Rebound Adjust, 3.280 TLG, Al 7075
210-42-000 Rod: Adjuster w/ Seal [0.177 OD, 2X 0.125 Hex, 3.145 TLG]
210-42-001 Rod: Adjuster w/ Seal [0.177 OD, 2X 0.125 Hex, 3.395 TLG]
210-42-002 Rod: Adjuster w/ Seal [0.177 OD, 2X 0.125 Hex, 3.645 TLG]
210-42-003 Rod: Adjuster w/ Seal [0.177 OD, 2X 0.125 Hex, 3.895 TLG]
210-42-004 Rod: Adjuster w/ Seal [0.177 OD, 2X 0.125 Hex, 4.145 TLG]
210-49-000 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [2.174 TLG]
210-49-001 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [2.424 TLG]
210-49-002 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [2.674 TLG]
210-49-004 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [3.174 TLG]
210-49-005 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [3.424 TLG]
210-49-006 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [3.674 TLG]
210-49-008 Damping Adj. Part: (T) Inner Compression Adj., RP3, Ball Tip [4.174 TLG]
210-50-000 Damping Adj. Part: (T) Metering Rod [0.167 OD, 2.112 TLG]
210-50-001 Damping Adj. Part: (T) Metering Rod [0.167 OD, 2.362 TLG]
210-50-002 Damping Adj. Part: (T) Metering Rod [0.167 OD, 2.612 TLG]
210-50-004 Damping Adj. Part: (T) Metering Rod [0.167 OD, 3.112 TLG]
210-50-005 Damping Adj. Part: (T) Metering Rod [0.167 OD, 3.362 TLG]
210-50-006 Damping Adj. Part: (T) Metering Rod [0.167 OD, 3.612 TLG]
210-50-008 Damping Adj. Part: (T) Metering Rod [0.167 OD, 4.112 TLG]
210-51-000 Damping Adj. Part: (T) Inner Comp. Adj., TRIAD, Ball Tip [2.542 TLG]
210-51-003 Damping Adj. Part: (T) Inner Comp. Adj., TRIAD, Ball Tip [3.292 TLG]
210-51-004 Damping Adj. Part: (T) Inner Comp. Adj., TRIAD, Ball Tip [3.542 TLG]
210-51-005 Damping Adj. Part: (T) Inner Comp. Adj., TRIAD, Ball Tip [3.792 TLG]
210-53-000 Damping Adj. Part: (T) Compression Adj. Rod [1.235 TLG]
210-53-001 Damping Adj. Part: (T) Compression Adj. Rod [1.500 TLG]
210-55-000 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 1.981 TLG]
210-55-001 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 2.231 TLG]
210-55-002 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 2.481 TLG]
210-55-004 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 2.981 TLG]
210-55-005 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 3.231 TLG]
210-55-006 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 3.481 TLG]
210-55-008 Damping Adjust Part: (T) Metering Rod, Rebound [0.110 ID X 3.981 TLG]

CAMS
210-30-017 Damping Adjust Part: Cam, TRIAD Stainless Steel
210-30-018 Damping Adjust Part: Cam Shaft, 3 Lobe, Stainless Steel
210-30-019 Damping Adjust Part: Cam, 3 X 2 Position, Stainless Steel
210-30-020 Damping Adjust Part: Cam Shaft, RP2, Stainless Steel
210-30-021 Cam Shaft, 3 Position, Stainless Steel
815-02-007-A G Adjust Assembly: Ramp [1.094 OD X .529 TLG] Al 6061
210-30-022 Damp Adj Part: Upside Down Cam, 3 X 2 Position, Stainless Steel

EYELET PARTS
213-01-102 Eyelet Parts: Reservoir End Cap [1.070 Bore, .175 ID X 1.200 OD X 1.347 TLG] Al 7075, Black Ano III
213-01-112 Eyelet Parts: Sleeve [.498 ID x .665 OD x .061 TLG] MDS-Nylon 6/6, For .620 Pin
213-01-116 Eyelet Parts: Reservoir Connector [1.070 Bore, 1.050 OD X 1.335 TLG] Al 7075
213-01-129 Eyelet Parts: Reservoir End Cap [1.070 Bore, .175 ID X 1.200 OD X 1.347 TLG] Al 7075, Black Ano III
213-07-035-B Eyelet Parts: Eyelet, Shaft, RD Adjuster [?.375 Shaft, .825 OD, 1.438 TLG] Al 7075, Black Ano III
213-07-044-C Eyelet Parts: Eyelet, RD Adjust [? 0.625 Shaft, 1.625 OD X 2.340 TLG] Al 6061, Clear Ano III
213-07-053 Eyelet Parts: Eyelet, Shaft, RD Adjuster [?.500 Shaft, .825 OD, 1.463 TLG] Al 7075, Black Ano III
213-07-055 Eyelet Parts: Eyelet, MY05 FLOAT
213-07-056 Eyelet Parts: Eyelet, RD Adjust [? 0.375 Shaft, 1.620 OD X 1.438 TLG] Al 6061, Black Ano II, Impact Extrusion
213-07-057 Eyelet Parts: Eyelet, Shaft [? 0.375 Shaft, 1.620 OD X 1.438 TLG] Al 6061, Black Ano II, Impact Extrusion
213-07-059 Eyelet Parts: Eyelet, FLOAT DHX
213-07-060 MY05 Eyelet Parts: Eyelet, RD Adjust [? 0.375 Shaft]
213-07-061 Eyelet Parts: Eyelet, Brain Remote Adjust
213-07-074 Eyelet Parts: Eyelet, Shaft, RD Adjuster [?.500 Shaft, 15.25mm Eyelet, 1.713 TLG] Al 7075, Black Ano III
213-07-076 Eyelet Parts: Enduro, Semi-Sphere
213-07-077 Eyelet, Dual Cam w/ Stop [? 0.375 Shaft, 1.863 OD X 1.874 TLG] Black
213-07-078 Eyelet, Shaft, RD Adj. [?.500 Shaft, 15.25mm OD, 1.463 TLG] Al 7075, Blk Ano III

RESERVOIR END CAPS
226-00-028 Reservoir End Cap: Non Adjust, Pellet [1.070 Bore, 1.200 OD X 0.70 ID X 0.700 TLG] Al 6061, Black Ano II
226-00-033 Reservoir End Cap: BP Adjust, Schrader [1.070 Bore, 1.200 OD X 5/16-32 ID X .740 TLG] Al 6061, Black Ano II
226-00-037 Reservoir End Cap: Remote, PP Adjust [1.070 Bore, ? 0.500 Shaft] Al 6061, Black Ano III
226-00-038 Reservoir End Cap: Bottom-Out Adjust [1.070 Bore,1.200 OD X 3/4-20 ID X .525 TLG] Al 6061, Clear Ano III
226-00-040 Reservoir End Cap: Trail Tune Adjust, Al 2011-T6, Black Ano II w/ Seal
226-00-042 Reservoir End Cap: Pellet w/ Ring [1.070 Bore], Al 6061-T6, Black Ano II

RESERVOIRS
227-09-014 Reservoir: DHX [1.070 Bore X 1.200 OD X .565 ID X 2.400 TLG]
227-09-015 Reservoir: DHX [1.070 Bore X 1.200 OD X .565 ID X 2.175 TLG]
227-09-016 Reservoir: Cap Style [1.070 Bore, 2.400 TLG] Al 6061, Clear Ano III
227-09-018 Reservoir: VAN R Cap w/ Ring [1.070 Bore, 2.400 TLG] Al 6061, Black Ano III
227-15-000 Reservoir: Cap Style [1.070 Bore X 1.200 OD X 3.700 TLG] Al 6061, Black Ano III
227-15-001 Reservoir: Cap Style [1.070 Bore X 1.200 OD X 3.965 TLG] Al 6061, Black Ano III

DAMPER SHAFTS
229-15-003-B Shaft: (T) [0.375 OD X 2.655 TLG, 0.325 SHLG] Steel Chrome
229-15-005-B Shaft: (T) [0.375 OD X 3.155 TLG, 0.325 SHLG] Steel Chrome
229-19-020 Shaft: [.175 ID X .3738 OD X 2.268 TLG, 2X .125 SLOT, .325 SHLG] 7075-T6 AL
229-19-021 Shaft: [.510 ID X .622 OD X 3.000 TLG, ?.041 Bleed, .325 SHLG] Al 7075, Clear Ano III
229-19-023 Shaft: [.175 ID X .3738 OD X 1.787 TLG, 2X .125 SLOT, .325 SHLG] 7075 AL
229-27-003-B Shaft: (T) [0.175 ID X 0.375 OD X 2.605 TLG, ?.080 Bleed, 0.325 SHLG] Steel, Chrome
229-27-005-B Shaft: (T) [0.175 ID X 0.375 OD X 3.105 TLG, ?.080 Bleed, 0.325 SHLG] Steel, Chrome
229-27-006-B Shaft: (T) [0.175 ID X 0.375 OD X 3.355 TLG, ?.080 Bleed, 0.325 SHLG] Steel, Chrome
229-27-008-B Shaft: (T) [0.175 ID X 0.375 OD X 3.855 TLG, ?.080 Bleed, 0.325 SHLG] Steel, Chrome
229-36-000 Shaft: (T) [0.175 ID X 0.375 OD X 1.855 TLG] 7075 Alum
229-36-001 Shaft: (T) [0.175 ID X 0.375 OD X 2.105 TLG] 7075 Alum
229-36-002 Shaft: (T) [0.175 ID X 0.375 OD X 2.355 TLG] 7075 Alum
229-36-003 Shaft: (T) [0.175 ID X 0.375 OD X 2.605 TLG] 7075 Alum
229-36-004 Shaft: (T) [0.175 ID X 0.375 OD X 2.855 TLG] 7075 Alum
229-36-005 Shaft: (T) [0.175 ID X 0.375 OD X 3.105 TLG] 7075 Alum
229-36-006 Shaft: (T) [0.175 ID X 0.375 OD X 3.355 TLG] 7075 Alum
229-36-008 Shaft: (T) [0.175 ID X 0.375 OD X 3.855 TLG] 7075 Alum
229-38-000 DHX Shaft: (T) [.175 ID X .498 OD X 4.105 TLG] Al 7075, Clear Ano III
229-38-001 DHX Shaft: (T) [.175 ID X .498 OD X 4.355 TLG] Al 7075, Clear Ano III
229-38-002 DHX Shaft: (T) [.175 ID X .498 OD X 3.855 TLG] Al 7075, Clear Ano III
229-38-003 DHX Shaft: (T) [.175 ID X .498 OD X 3.605 TLG] Al 7075, Clear Ano III
229-38-004 DHX Shaft: (T) [.175 ID X .498 OD X 3.355 TLG] Al 7075, Clear Ano III
229-40-002 Shaft: (T) [0.175 ID X 0.375 OD X 2.355 TLG] 7075 Alum
229-42-001 Shaft: (T) [0.375 OD x 2.105 TLG] 7075-T6
229-42-002 Shaft: (T) [0.375 OD x 2.355 TLG] 7075-T6
229-42-003 Shaft: (T) [0.375 OD x 2.855 TLG] 7075-T6
229-42-004 Shaft: (T) [0.375 OD x 3.105 TLG] 7075-T6
229-44-000 Shaft: (T) [0.345 ID X 0.498 OD X 2.855 TLG] 7075-T6
229-44-001 Shaft: (T) [0.345 ID X 0.498 OD X 3.105 TLG] 7075-T6
229-44-002 Shaft: (T) [0.345 ID X 0.498 OD X 3.355 TLG] 7075-T6
229-44-003 Shaft: (T) [0.345 ID X 0.498 OD X 3.605 TLG] 7075-T6
229-44-004 Shaft: (T) [0.345 ID X 0.498 OD X 3.855 TLG] 7075-T6

SPACERS
233-00-021-A Spacer: Shaft [0.378 ID X 0.700 OD X 0.050 TLG] Steel
233-00-029-A Spacer: Shaft [.630 ID X .800 OD X .050 TLG] Steel
233-00-037-A Spacer: Shaft [0.377 ID X 0.480 OD X 0.040 TLG] Al 6061
233-00-045 Spacer. Volume [.6 in^3] Black Delrin
233-00-050 Spacer: Shaft [0.502 ID X 0.700 OD X 0.050 TLG] Steel
233-00-052 Spacer: Shaft, Volume Reducer [0.375 ID X 1.425 OD X 0.700 TLG] Black Delrin
233-00-053 Spacer: ProPedal [0.252 ID x 0.425 OD x 0.050 TH]
233-00-054 Spacer: ProPedal Top Out [0.377 ID x 0.850 OD x 0.069 TH] Steel
233-00-066 Spacer: Shaft Volume Reducer [1.340 OD X 0.375 ID X .525 TLG] Black Delrin
233-00-067 Spacer: Shaft Volume Reducer [1.500 OD X 0.502 ID X .525 TLG] Black Delrin
233-00-068 Spacer: Shaft, Volume Reducer [?1.340 OD, ?.375 ID, .150 TLG] Black Delrin
233-00-071 Spacer: Shaft, Clip In [.497 ID X 1.220 OD X .275 TLG] Acetal, Black
233-00-072 Spacer: Shaft, Clip In [.497 ID X 1.220 OD X .150 TLG] Acetal, Black

SPRING HARDWARE
234-00-008-E Spring Hardware: Spring Retainer [1.600 OD X 0.200 TLG, ? 0.940 Bore] Al 7075, Slotted, Clear Ano II
234-00-009-B Spring Hardware: Preload Ring [1.740 OD X 0.300 TLG, ? 0.940 Bore] Al 6061, Std Thread
234-00-099 Spring Hardware: Ring, Preload Collar [1.250-24 ID X 1.990 OD X .400 TLG] AL 6061, Black Ano Type III
234-00-102 Spring Hardware: Spring Retainer: Slotted [1.070 Bore, .500 Shaft, 1.850 OD X .275 TLG] Al 6061, Black Ano II
234-00-121 Spring Hardware: Ring, Preload Collar 1.250 ID Spring [.940 Bore, 1.125-20 ID X 1.990 OD X .400 TLG] AL 6061, Black Ano Type III
234-00-130 Spring Hardware: Ring, Preload Collar 1.375 ID Spring [.940 Bore, 1.125-20 ID X 1.990 OD X .400 TLG] AL 6061, Black Ano Type III
234-00-135 Spring Hardware: Spacer, ProPedal Preload [.375 OD X .220 TLG] AL 6061
234-00-138 Spring Hardware: ProPedal Spring Perch [0.252 ID X 0.850 OD X 0.100 TLG] Steel
234-00-139 Spring Hardware: ProPedal Shuttle [0.850 OD X 0.429 ID X 0.050 TH] Steel
234-00-140 Spring Hardware: (T) ProPedal Spring Spacer [0.322 ID x 0.850 OD x 0.006 TH]
234-00-141 Spring Hardware: (T) ProPedal Spring Spacer [0.322 ID x 0.850 OD x 0.008 TH]

FASTENER CUSTOM
241-02-011-A Fastener, Custom: RD Set Screw [3/8-32 OD X .125 Hex ID X .125 TLG] Al 7075
241-02-012-A Fastener, Custom: Set Screw [5/16-32 OD X .188 Hex ID X .200 TLG] Al 7075
241-02-020 Fastener, Custom: Set Screw, PP Spring Adjust [7/16-28 LH OD X .156 Hex ID X .150 TLG] 303 SS
241-02-024 Fastener, Custom: Bolt, Banjo w/ Seal [M8 x 1.0, M5 Socket, 0.765 TLG] 416 SS, Heat Treated
241-02-026 Fastener, Custom: Compression Screw
241-02-027 Fastener, Custom: Machined ProPedal Plug, Convert DHX 4.0 to 3.0
241-02-028 Fastener, Custom: Tapered, RD Set Screw [3/8-32 OD X 0.125 Hex ID X 0.175 TLG] AL 7075
241-04-002 Fastener, Custom: Turner, DHR DHX Remote [M6 ID X 0.975 OD X 0.400 TLG] Black
241-04-003 Fastener, Custom: Turner, DHR DHX Remote [6mm ID X 0.975 OD X 0.575 TLG] Black

2007 OWNERS MANUAL
605-00-069 2007 CD-ROM Owner's Manual

AIR VALVE ASSEMBLIES
802-00-001-A Air Valve Assembly: [5/16-32 ORB X Schrader] w/o Cap, FAV #3
802-00-004-A Air Valve Assembly: [5/16-32 ORB X Schrader X 1.125 TLG] w/o Cap, FAV #3
802-03-007 Air Valve Assembly: Banjo, 90 Deg., w/ Core
802-03-008 Air Valve Assembly: Banjo, Fastener, .85 L, w/ Seals
802-03-009 Air Valve Assy: Banjo, 90 degree, w/ Bolt
804-12-002-A Body Cap Assembly: Piggyback, PP Adjust [1.070 Bore, ? .500 Shaft, TLG] Black Ano III
804-12-003-A Body Cap Assembly: Piggyback, DHX 3.0 [1.070 Bore, ? .500 Shaft, TLG] Black Ano III
804-12-004 Body Cap Assembly: Piggyback, VAN R [1.070 Bore, ? .500 Shaft, TLG] Black Ano III
804-12-005 Body Cap Assembly: Remote Reservoir, PP Adjust [1.070 Bore] Black Ano III
804-12-006 Body Cap Assembly: Piggyback, DHX 3.0 [1.070 Bore, ? .500 Shaft, TLG] Black Ano III

DOWEL PIN
221-00-003-A Pins, Custom: Dowel Pin [ 0.09375 OD X 0.340 TLG] SS

DAMPING PISTONS
222-01-014-D Piston: Damping, RD Adjust [? 0.940 Bore, 0.925 OD X .252 ID X 0.220 TLG, no bleed] Al 7075
222-01-035-A Piston: Damping, RD Adjust [.940 Bore, .925 OD X .377 ID X .220 TLG, No Bleed] Al 7075
222-01-037-A Piston: Damping, CD Adjust [1.070 Bore, 7/8-28 OD X .252 ID X .200 TLG, No Bleed] Al 7075
222-01-048 Piston: Damping, RD CD Adjust [.940 Bore, .925 OD X .252 ID X .320 TLG] Al 7075
222-01-049-A Piston: Check [0.700 OD X 0.252 ID X 0.050 TH, ? 0.375 Shaft] Steel
222-01-050 Piston: Damping, RD Adjust [1.070 Bore, 1.054 OD X .252 ID X 0.220 TLG, no bleed] Al 7075, Clear Ano III
222-01-059 Piston: Booster [.925 OD x .530 TLG], Clear Ano III
222-01-068 Piston: Bottom-Out Adjust [1.070 Bore, 1.060 OD X 5/16-32 ID X 1.150 TLG] w/ Schrader, Al 6061, Black Ano III
222-01-069 Piston: Damping [0.940 Bore, 0.925 OD X 0.260 TLG] 7075-T6, Clear Ano III
222-01-072 Piston: Bottom-Out Adjust [1.070 Bore, 1.060 OD X 0.070 ID X 1.150 TLG] w/ Pellet, Al 6061, Black Ano III
222-01-073 Piston: Damping [.940 Bore X .925 OD X .377 ID X .220 TLG] 7075-T6, Clear Ano III
222-01-080 Piston: Damping, RD Adjust [1.070 Bore, 1.054 OD X .252 ID X 0.220 TLG, no Ano] Al 7075
222-05-000-B Piston: (T) Damping [? 0.940 Bore, No Bleed, 0.220 TLG] CD, Al 7075 ( VANILLA & FLOAT ) NEED TO DRILL FOR PROPER FREE BLEED

FLOATING PISTON ASSEMBLIES
805-00-012-A Piston Assembly: Floating [? 1.282 Bore]
805-00-014-A Piston Assembly: Floating [? 0.940 Bore, 0.325 TLG]
805-00-020-A Piston Assembly: Floating [? 1.070 Bore, 0.325 TLG]
805-00-024 Piston Assembly: Floating w/ Bleed [1.070 Bore] Al 6061
805-00-025 Piston Assembly: Floating [1.070 Bore, 1.060 OD X 0.185 ID, 0.325 TLG]
805-00-027 Piston Assembly: Floating [? 1.070 Bore, 0.325 TLG]

DAMPER PISTON ASSEMBLIES
805-02-005-A Piston Assembly: Damping, RD Adjust [? 0.940 Bore, 0.220 TLG] w/ Glyde Ring
805-02-008-A Piston Assembly: Damping, RD Adjust [? 0.940 Bore, 0.625 Shaft, 0.220 TLG] w/ Glyde Ring
805-02-009-A Piston Assembly: Damping, RD CD Adjust, CD Check [.940 Bore, .320 TLG] w/ Glyde Ring
805-02-010 Piston Assembly: Damping, RD Adjust [1.070 Bore] w/ Glyde Ring
805-02-011 Piston Assembly: Damping, RD Adjust [? 0.940 Bore, 0.498 Shaft, 0.240 TLG] w/ Glyde Ring
805-02-012 Piston Assembly: Damping, RD Adjust [? 0.940 Bore, 0.220 TLG] w/ Glyde Ring
805-02-013 Piston Assembly: Damping, RD Adjust [1.070 Bore] no Ano, w/ Glyde Ring

AIR SLEEVE ASSEMBLIES
806-29-006 Sleeve Assembly: [? 1.500 Bore, 3.960 TLG] w/ seal, bearing, and wiper
806-29-014 05 Sleeve Assembly: AVA [1.500 Bore, 4.350 TLG], For 8.5 x 2.5
806-29-015 05 Sleeve Assembly: AVA [1.500 Bore, 4.850 TLG], For 9.5 x 3.0
806-29-039 05 Sleeve Assembly: [? 1.500 Bore, 2.698 TLG], for 5.5 x 1.0
806-29-040 05 Sleeve Assembly: [? 1.500 Bore, 3.198 TLG] for 6.5 x 1.5
806-29-041 05 Sleeve Assembly: [? 1.500 Bore, 3.698 TLG] for 7.25 x 1.75/7.5 x 2.0
806-29-042 05 Sleeve Assembly: [? 1.500 Bore, 2.948 TLG] for 6.0 x 1.25
806-29-043 05 Sleeve Assembly: [? 1.500 Bore, 3.948 TLG] for 7.875 x 2.0
806-29-048 07 Sleeve Assembly: [? 1.500 Bore, 3.448 TLG] for 7.0 x 1.6
806-29-070 05 Sleeve Assembly XV: [? 1.500 Bore, 1.875 OD, 3.948 TLG] for 7.875 x 2.0
806-29-071 06 Sleeve Assembly XV: [? 1.500 Bore, 1.875 OD, 3.698 TLG] for 7.50 x 2.0
806-29-072 06 Sleeve Assembly XV1: [? 1.500 Bore, 1.950 OD, 4.850 TLG] for 9.50 x 3.0
806-29-073 06 Sleeve Assembly XV2: [? 1.500 Bore, 1.875 OD 4.850 TLG] for 9.50 x 3.0
806-29-074 06 Sleeve Assembly XV1: [? 1.500 Bore, 1.950 OD, 4.350 TLG] for 8.75/8.50 x 2.50
806-29-075 06 Sleeve Assembly XV2: [? 1.500 Bore, 1.875 OD, 4.350 TLG] for 8.75/8.50 x 2.50
806-29-076 06 Sleeve Assembly XV2: [? 1.500 Bore, 2.025 OD, 3.948 TLG] for 7.875 x 2.0/2.25
806-29-077 06 Sleeve Assembly XV1: [? 1.500 Bore, 1.875 OD, 3.198 TLG] for 6.5 x 1.5
806-29-078 06 Sleeve Assembly XV1: [? 1.500 Bore, 1.950 OD, 4.600 TLG] for 9.00 x 2.75
806-29-079 06 Sleeve Assembly XV2: [? 1.500 Bore, 1.875 OD, 4.600 TLG] for 9.00 x 2.75

VALVING ASSEMBLY (Drawings are for valving codes - we do not sell parts as complete assemblies)
807-06-007-A Valving Assembly: CD Adjust [? 1.070 Bore, C 5 X 0.004, R 1+1 X 0.004]
807-06-010 Valving Assembly: CD Adjust, TT Adj. [? 1.070 Bore, C 4 X 0.006, R 1+1 X 0.004]
807-06-115 Valving Assembly: TRIAD [.940 Bore, .050, C PPP, R None]
807-62-220 Valving Assembly: [? 0.940 Bore, C Full 0.004, R 4 X .006]
807-62-230-A Valving Assembly: [? 0.940 Bore, .800 OD Top Out, C Full 0.004, .043, 0.220 TLG] CD
807-62-261 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, No Bleed, .220 TLG] CD
807-62-264 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, R .036, .220 TLG] CD
807-62-265 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, R .039, .220 TLG] CD
807-62-267 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, R .047, .220 TLG] CD
807-62-268 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, R .060, .220 TLG] CD
807-62-270 Valving Assembly: [.940 Bore, C .012 Ring 2X .004, R .055, .220 TLG] CD
807-62-284 Valving Assembly: [0.940 Bore, 0.800 OD Top Out, C 0.012 Ring 3X 0.004, R 0.039, 0.220 TLG] CD
807-62-289 Valving Assembly: [0.940 Bore, 0.800 OD Top Out, C 0.012 Ring 3X 0.004, R 0.047, 0.220 TLG] CD
807-62-290 Valving Assembly: [? 0.940 Bore, C Full 0.004, Bleed 3 X 0.052]
807-63-024 Valving Assembly: RD Adjust [.940 Bore, .800 OD X .050 Top Out, C .012 Ring 3X .004, R 2X .010]
807-63-032 Valving Assembly:2006 DHX Air STD Valving Assy: RD Adjust [.940 Bore, 0.498 Shaft]
807-63-034 Valving Assembly:06 Enduro/Stumpy Valving Assy: RD Adjust [.940 Bore, 0.498 Shaft]
807-63-035 Valving Assembly:07 Brain Valving RD Adj [.940 Bore, .498 Shaft, C PP]
807-63-036 Valving Assembly:07 Epic Valving RD Adj [.940 Bore, .625 Shaft, C PP, R 5]
807-63-037 Valving Assembly:07 Epic Valving RD Adj [.940 Bore, .625 Shaft, C PP, R 5]
807-64-007 DHX Valving Assembly: [1.070 Bore, .252 ID] DHX
807-64-008 DHX Valving Assembly: [1.070 Bore, .252 ID] VAN R, STD
807-64-009 DHX Valving Assembly: [1.070 Bore, .252 ID] VAN R, Light
807-64-011 DHX Valving Assembly: 07 SBC Demo [1.070 Bore, .252 ID] DHX
807-72-010 Valving Assembly: 07 FLOAT RP, CD Firm, RD Med.
807-72-011 Valving Assembly: 07 FLOAT RP, CD Firm, RD Light
807-72-013 Valving Assembly: 08 FLOAT RP, CD Firm, RD X-Light
807-72-014 Valving Assembly: 08 FLOAT RP, CD Med., RD X-Light
807-72-015 Valving Assembly: 08 FLOAT RP, CD Light, RD Light
807-72-016 Valving Assembly: 08 FLOAT RP, CD Med., RD Med.
807-72-017 Valving Assembly: 08 FLOAT RP, CD Light, RD Med.
807-73-000 Valving Assembly: 08 DHX Air, Standard Valving
807-76-000 Valving Assembly: 07 FLOAT R, CD Med., RD Med.
807-76-001 Valving Assembly: 07 FLOAT R, CD Light, RD Light
807-76-002 Valving Assembly: 07 FLOAT R, CD Firm, RD Firm
807-76-003 Valving Assembly: 07 FLOAT R, CD Med., RD Light
807-76-006 Valving Assembly: 08 FLOAT R, CD Light, RD Med.
807-76-007 Valving Assembly: 08 FLOAT R, CD Plush, RD Light

EYELET ASSEMBLY
808-14-026-B Eyelet Assembly: Shaft, RD Adjust, Impact [? 0.375 Shaft, 0.825 OD X 1.438 TLG] w/o DU, Black Ano III
808-14-052-C Eyelet Assembly: Shaft IV [? 0.625 Shaft, ? 1.625 OD, 2.340 TLG] Impact Extrusion, Clear Ano III
808-14-059-A DHX Eyelet Assembly: Shaft, RD Adjust, [? .500 Shaft, .825 OD X 1.463 TLG] Black Ano III
808-14-061 Eyelet Assembly: MY05 Shaft [? 0.375 Shaft, 1.625 OD X 1.700 TLG] Impact Extrusion, W/O DU, Left Side Valve
808-14-062 Eyelet Assembly: MY05 Shaft, RD Adjust [? 0.375 Shaft, 1.620 OD X 1.438 TLG] Impact Extrusion W/O DU Black
808-14-064 Eyelet Assembly: Shaft, RD Adjust, Impact [? 0.500 Shaft, 15.25mm Eyelet, 0.825 OD X 1.713 TLG] w/o DU, Black Ano III
808-14-065 Eyelet Assy: Shaft, RD Adj, [? .500 Shaft, 15.25mm Eye X 1.463 TLG] Blk Ano III
808-17-001 05, 06, 07 Eyelet Assembly: FLOAT R
808-17-005 06 Eyelet Assembly: Piggyback, DHX Air 5.0 [? 0.500 Shaft]
808-17-007 06 Eyelet Assembly: Remote IV [? 0.498 Shaft]
808-17-008 06 Eyelet Assembly: TRIAD
808-17-009 06 Eyelet Assembly: Piggyback, DHX Air 3.0 [? 0.500 Shaft]
808-17-011 06 Eyelet Assembly: FLOAT R, LAV
808-17-012 07 Eyelet Assembly: RP23
808-17-013 07 Eyelet Assembly: RP2
808-17-014 07 Eyelet Assembly: RP3
808-17-015 07 Eyelet Assembly: RP23, LAV
808-17-016 07 Eyelet Assembly: RP2, LAV
808-17-017 07 Eyelet Assembly: Piggyback, DHX Air 4.0, 5.0 LAV [? 0.500 Shaft]
808-17-018 07 Eyelet Assy: RPL
808-17-019 07 Eyelet Assy: Piggyback, DHX Air 4.0/5.0 GAV [? 0.500 Shaft]
808-17-020 07 Eyelet Assembly: RP2, GAV
808-17-021 07 Eyelet Assembly: RP23, GAV
808-17-022 Eyelet Assy: Piggyback, DHX Air 3.0, GAV [? 0.500 Shaft]
808-17-038 07 Eyelet Assembly: RP23, Upside Down Lever

RESERVOIR ASSEMBLY REMOTE
810-00-069 Reservoir Assembly: Remote, PP Adjust [1.070 Bore, ? .500 Shaft] Black Ano III

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Fri May 31, 2013 10:40 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
2005 - 2008 Rear Shocks Small Parts Numbers (continued...)

BEARING ASSEMBLY
812-06-034 All Years DHX "Long" Bearing Assembly: Buna-N O-Ring, [1.070 Bore, 1.125-18 UNEF-2B, .975 TLG]
812-06-048 All Years DHX "short"Bearing Assembly: Buna-N O-Ring, [1.070 Bore, 1.125-18 UNEF-2B, .725 TLG]
812-06-043 All Years Float "short"Bearing Assembly: Black [.940 Bore, 1.500 Bore, .375 Shaft, .815 TLG]
812-06-044 All Years Float "long" Bearing Assembly: Black [.940 Bore, 1.500 Bore, .375 Shaft,1.065 TLG]
812-06-045 All Years Brain Shock - Float R IV Bearing Assembly: Black [.940 Bore, 1.500 Bore, .620 Shaft, 1.065 TLG]
812-06-046 All Years DHX Air "short" Bearing Assembly: Black [.940 Bore, 1.500 Bore, .500 Shaft, .815 TLG]
812-06-047 All Years DHX Air "long" Bearing Assembly: Black [.940 Bore, 1.500 Bore, .500 Shaft, 1.065 TLG]

RESERVOIR END CAP ASSEMBLY
813-00-040 Reservoir End Cap Assembly: 2006 Non Adjust, Pellet [1.070 Bore, ] Black Ano III
813-00-050 Reservoir End Cap Assembly: BO_BP Adjust [1.070 Bore, ] Clear Ano III, w/ Schrader
813-00-051 Reservoir End Cap Assy: MY06 BP Adj [1.070 Bore] Black Ano III, w/ Schrader
813-00-052 Reservoir End Cap Assembly: 2006 TT Adj. Al Shaft [? 1.070 Bore, C 4 x 0.006] Black
813-00-054 Reservoir End Cap Assembly: MY06 BO Adjust [1.070 Bore, ] Clear Ano III, w/ Pellet
813-00-056 Reservoir End Cap Assembly: 90 duro, TT Adj. [? 1.070 Bore] Black, w/ Threaded Pellet Retainer
813-00-057 Reservoir End Cap Assembly: 2006 TT Adj. Remote, Al Shaft [? 1.070 Bore, C 4 x 0.006] Black
813-00-059 Reservoir End Cap Assembly: 2007 Non Adjust, Wire Ring, Pellet [1.070 Bore, ] Black Ano III

REAR SHOCK SEAL KITS
803-00-028-C Vanilla and Vanilla R Damper
803-00-041-B Air Vanilla Air Sleeve
803-00-042-B Kit: Rebuild, Air Vanilla FLOAT Air Sleeve
803-00-044-A Air Vanilla and Air Vanilla FLOAT Damper
803-00-051-C FLOAT, RP3 Damper
803-00-100-A K2 Trunion, Air Sleeve
803-00-105 Obsolete - Do Not Use - Kit: Seals, Vanilla DH MY 02-03
803-00-106 Brain Shox, Damper all models
803-00-107 Enduro DTS Damper
803-00-122 DHX/VAN R Damper
803-00-142 FLOAT Air Sleeve
803-00-143 DHX Air Damper

REAR SHOCK VALVE TUNING KITS
803-15-000-A Kit: Vanilla RC, Valving, Big Hit
803-15-004-A Kit: Float RL, K2 Trunion, Valving

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
PostPosted: Sat Jun 01, 2013 9:09 pm 
Offline
yappin' kitty
User avatar

Joined: Mon Feb 25, 2013 9:05 pm
Posts: 957
Location: Dallas, TX
That was a good read. Thanks.

_________________
Nothing to see here


Top
 Profile  
Reply with quote  
PostPosted: Sat Jun 01, 2013 10:14 pm 
Offline
big hucker
User avatar

Joined: Wed Jan 16, 2013 7:32 pm
Posts: 3086
Location: Dallas, TX
Lol, it's more for the diagrams than anything. Click on one of the hyper-linked part numbers and you can see all of the innards... ;)

_________________
http://about.me/marpilli


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Theme created StylerBB.net